Photosmart 8250 printing computer codes

->An '0x ...' Error Message Displays on the Front Panel When Printing HP Photosmart C5380 All-in-One Printer - HP Customer Care (United States - English)<-

If you need more help post back!
Thumbs and testimonial are welcome!

try to reinstall the printer driver software. you can download the latest printer driver software from yout printer manufacturer's web site then restart the computer and printer.

Although the support page of the following link is titled: 'Carriage Jam' this article (with pictures) shows the reader exactly what to look for when the Print Cartridge Cradle becomes stuck.
Click here: http://bit.ly/dpui4S

ok..do us a favor here..try a test page from printer selection panel. just to make sure it's not the printer..you may need to re install new printer drivers.

Reset the product:

1. Without turning off the product, disconnect the USB cable from the rear of the product.
2. Remove the cartridges from the product.
3. Wait for the 'Insert Cartridges ' message to display on the control panel.
4. Disconnect the power cord from the back of the product.
5. Wait 60 seconds.
6. Reconnect the power cord. If the product does not automatically turn on, press the Power button ( ).
7. Reinsert the cartridges, and then close any open doors on the product.
8. If you receive a prompt to print a calibration page, do so.
9. Reconnect the USB cable to the rear of the product, and then try printing again.

Set the default printer driver settings to print 10 x 15 cm (4 x 6 inch) photos

1. Make sure 10 x 15 cm (4 x 6 inch) photo paper is loaded into the photo tray. NOTE: The Photo Tray light on the printer does not have to be lit when printing from a computer.
2. Click Start and then click Control Panel .
3. Click Printers and Faxes .
4. Right-click the icon for the HP Photosmart 8200 Series and select Printing Preferences .
5. On the Paper/Quality tab, select 4x6 or 4x6 with tab from the Size is drop-down menu (under Paper Options).
6. Make sure that the Source is box is set to Photo tray .
7. Click the Borderless Printing box if borderless prints are desired.
8. Click Apply and then click OK .
9. Open the software program you wish to use and set up the pictures you want to print. Make sure to select a 4x6 inch layout for the photos within the software program before you print from the software program.

Make sure printer is connected to computer.
Go to Start ,Control Panel ,Printers and make sure it does not say offline.
If it does right click it and select the option online.
If it does not then remove it and reboot the system.

Used HP's chat, they helped walk me through it. NO CHARGE! You push the 'on' button for 45 seconds after you disconnect all the cables. Plug in the power cable only. Then print a test page. If that works, plug in the USB. Should fix the problem. I'd recommend working with HP, as they can check the internals on your machine while you chat with them.

which OS you are working on?