I want indian tones for roland gw 8a? - Roland GW8 Keyboard Arranger

https://medias.audiofanzine.com/files/fp-2-om-478648.pdf
https://static.roland.com/assets/media/pdf/FP-90_e01_W.pdf
http://www.pianorent.dk/digitalpiano/roland-f140r/dokumenter/RP401R_F-130R.pdf
http://www.rosaudioservice.ru/uploads/attachments/pdf/owner-s-manual_FP-50_OM.pdf

A Gk3 cannot be connected directly to an electric piano or synthesiser. The 23 pin DIN connector connects the GK3 / GUITAR to a Roland guitar synthesiser which produces the synth tones . This unit can be connected via midi cable to any external keyboard or synthesiser...to produce different or varied tones from the external synth ........provided the devices are able to communicate with each other...see the midi implementation charts for each device for information....

roland will sell to customers,call them for est.



http://www.shopjimmy.com/

Long Back I had the same problem I just reloaded the OS and every problem went off try this

Contact Your Product Dealer Or Store Manager And Use Your Warenty Card.

Open Roland Website And Open The Download Tab(Page), Than Download The Asian Collection From Below List and Than Using Your USB Input Your Keyboard than After Write This All of Performance From Writeee Button.Try It.

I have a GW-8 Roland. its automatically plays. What may be the reason and how to repair?

please help

I assume you are plugging this into a ROLAND brand product as the Roland sustain uses a normally CLOSED contact while MOST other brands use NORMALLY OPEN contacts.

The Roland synths now monitor the pedal as the power is turned on and supposedly decides which contact type is used.

Remember that for MANY voices, such as piano, notes are held longer BUT they do not continue indefinitely just like the sustain on a real piano works. On a real piano the dampers are lifted, but the strings eventually stop ringing due to the losses of energy in the strings.

Some voices will be held,such as organ tones.

I don't have enough information from your post regarding what voice you are having trouble with.

OK... It is literally impossible for the unit to "go out of tune" as it is crytal controlled... HOWEVER what is probablly happening is the PITCH BENDER is getting into the mix somehow.
If the centering on the pitch bend control is sticking or is loose, this would likely be the problem.
Do some tests with the pitch bender to see if you can detect either a mechanical or offset condition of the control.

Read pages starting with 49 in your user's manual.

You MUST format the USB flash in the GW-8 before it can be used. Formating in a computer MAY b e inadequate as sometimes the formats have special quirks.

Also pay attention to the MAXIMUM file name length... It is 16 characters MAX !!!!