At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
We have a fuser unit that is out on our machine. I saw a Ricoh replacement part that fits this unit, do you recommend we purchase it? Also, how do we go about replacing the fuser ourselves?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The Ricoh error code 548 / SC548 is a fusing unit error code. If you are getting this error: Check the fuser unit to see if it is set properly. There are some connections on the fuser unit not making good contact.
Oct 9, 2012
SC 544 is a fuser overheat error. This could be caused by power outage or fluctuation in the power.
go to service mode. Hold down both "home" and "simple screen" for about 5 sec. and then press "user tools"
once in service mode go to SP5810 reset fuser error.
and reboot the machine.
You have a fuser error, you will need to repair the fuser unit or replace it, can be the thermistors, thermalfuse or heat lamp, then you'll need to reset the machine via service mode, strongly recommend to be repaired by a technician. Good luck.
OPEN FRONT DOOR OF COPIER LEFT SIDE SHOULD BE A CLEAR CONTAINER WITH OIL IN IT. THAT IS WASTE OIL FROM FUSER. HAS FILLED UP. EMPTY IT OR FIND A RICOH DEALER THAT CAN SELL ONE TO YOU. try ebay saw one on there
These machines use oil supply units located on top of the fuser unit. They are not refillable order another and replace... continueing to run this machine without fuser oil will cause the fuser to fail and copies to look terrible
you really can not refill the bottle but I would recommend two things. One find a fuser oil unit on ebay and order it quickly. Next hit the yellow clear modes button, then hit the numbers 1 0 7 , then hold the red clear stop button till the display panel changes. hit copy sp, select 7 data log. now use the page down arrows located in the middle of the disply till you see 7804 push it then go to #10 oil supply and hit execute. this will reset the oil counter and allow you to use the machine till you get the new unit.
×