Sd memory card says card can not be read why?

hi.
sd port is use for read yr sd card.. put yr sd card in sd port then yr can read it from clisk my computer icon and ten yr card will be locaten in g/h/f or try click 1 by 1 memory stick drive

regards

No, it's not possible, it'll never read SDHC in the SD slot. SD slot will only read SD, Mini SD (with adaptor) and Micro SD (with Adaptor). If there's no SDHC card slot, then it doesn't support SDHC Card. The lists of supported memory card are listed below:
CompactFlash™ Type I and II,
Secure Digital/MultiMediaCard/Secure MultiMediaCard (SD),
xD-Picture Card,
Sony Memory Stick®,
MagicGate Memory Stick,
Memory Stick Duo,
Memory Stick Pro


I hope this clears your doubt.


Note: SDHC and SD are different Memory Card types.

Good luck.

Thanks for using FixYa.

Most likely the phone that doesn't read it and the SD card reader can read "SD" cards but not the "SDHC" that a 4G card will be. All SD cards 4G and above are SDHC, and a plain SD card reader will not read this card.
Buy an SDHC reader, and get a smaller (up to 2G) card to use on the older phone that can't read the 4G one. Hope this helps.

its might be that your card might got currupted, try formatting your card and then try again.

Your camera is only supporting: SD/MMC up to 1 Gigabyte

The card that you currently have might be high speed. All should be sorted if you change the SD card to the supported MMC SD card up to 1G. There is a lever on the SD card this one might need to be changed.

The card that you currently have might be faulty. Please try another card.
You might also need to switch the camera over to saving pictures directly onto the SD card.1: Menu, Cam settings, Chose AUTO or SD card option Press OK

Note: If the SD card isn't in the camera or is unreadable the camera will automatically go back to saving you taken pictures on the internal memory.

If it does not seat (fit) properly, why say the printer will not read SD cards? It certainly will read SD cards that are supported. You can still upload to computer and print from there as you suggested.

Have you tried another memory card?

Some devices can read SD but not SDHC. If your memory card is 1 or 2 gig, it's SD, if it's larger, it's SDHC which is not backwards compatible with SD.

Based on the age of the PSC 1350, I would bet it's a SD-only device.

Some notebooks cannot read SD capacities of 4GB and above. The workaround is to use an external SD card reader.

NOTE: Please rate our help to keep this free service online

To achieve MPEG2 video performance, large amounts of data must be written to the SD Memory Card in real time. The read and write speed of the SD Memory Card may differ from manufacturer to manufacturer, so we recommend using Panasonic SD Memory Cards with the high-speed transmission rate of 10MB per second (SD Memory Cards that are 256MB* or higher have a transmission rate of 10MB per second).