TOSHIBA REGZA 32LV67U USUALLY (ALMOST ALWAYS NOW) WHEN I TURN ON POWER THE YELLOW LIGHT COMES ON FLASHING 3 TIMES, QUICK PAUSE, 3 FLASH ........ THE GREEN LIGHT DOES NOT COME ON. WHEN I TURN OFF POWER, THE YELLOW LIGHT CONTINUES UNTIL I UNPLUG. IF I REPLUG AFTER A SHORT DELAY THE YELLOW COMES UP WITHOUT POWER BUTTON. I HAVE BEEN ABLE TO FINALLY GET IT ON BY CHANGING PLUG- IN SOURCE OR UNPLUGGING FOR LONGER PERIOD OF TIME SOMETIMES CAN YOU HELP ME WITH THIS. THIS TV IS ABOUT ONE YEAR OLD AND THE PROBLEM STARTED A MONTH OR SO AGO. IT WAS NOT USED FOR A COUPLE OF MONTHS WHEN WE WERE GONE.

Toshiba Regza 37in - 37HL17
TV will not turn on - Yellow power ind. Light blinks three times...
Fixed with a firmware update (hard to believe, but true). Search Google for a file named: 2007SEN069.zip (don't worry if the page you find it on doesn't mention the 37HL17 - it worked fine). Unzip the file, and copy the 3 folders and 3 files to the root of a small SD card. The SD card MUST be 2GB or less in size (I used a 1GB card), and it MUST be formatted with FAT-16 (not FAT-32). Mine was pre-formatted as FAT (FAT-16). The SD port is on the back of the TV behind a cover plate near the power cable. You do NOT need to remove the back cover of the TV, just the small cover plate (1 screw). UNPLUG the TV; remove the cover plate; insert the SD card (prepped as explained above); Plug in the TV; Watch the yellow lights blink, then turn blue, then go dark; UNPLUG the TV; remove the SD Card and replace the cover; Plug in the TV; Yellow lights will blink a few times (this is normal); when blinking stops, turn on the TV and you should be good to go. :-)
Pictures attached are from a Toshiba software upgrade bulletin I found online.

CONGRADULATIONS!

Toshiba has the manual for the 32LV67U at their support site. Go to http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp?nav=Product%20Support and select Televisions > TV/DVD > 32LV67U in the three drop down menus. Then select the User's Guide tab. To print out the manual, click on the Printer Friendly version link.

The direct link to the 32LV67U support is http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=SB&os=&category=&moid=2841881&rpn=undefined&modelFilter=32LV67U&selCategory=2797337&selFamily=2797340 .

I hope this helps.

Cindy Wells

try resting your tv. power off it press and hold av select botton and then power on your tv wait few minutes and it will rest your tv.... if not used the same wy holding menu botton instead.

dvd player will only play movies for the COUNTRY in which you purchased it. There is no way to purchase a system or configure a system to play ALL MEDIA FOR ALL COUNTRIES. The country codes are specific and each country wants to prevent any other country from playing their dvds music, etc.

I followed the steps at the following link and it worked for me. I have a 2007 Toshiba Regza 42HL67, but the firmware applies to many models as documented in the readme file at the location found via the link below. I used a 1gb SD card formatted FAT16, copied the unzipped files and folder to the card (wasn't sure if it required the top level folder or only the files under the top level folder so I copied both to the root of the SD card), unplugged the TV, inserted the card, plugged in the TV, waited 2.5 minutes, unplugged the TV, removed the card, plugged in the TV, yellow light flashed 3 times and went out. I turned on the TV and it has worked normally since last night.

http://www.benjammin.net/www/pages/techtips/Toshiba-Regza-42HL167.html

i know your problem. its an inverter loose connection from CCFL to inverter output. back of your LCD inside the TV. try to remove and re-connect again. be sure no power and AC is unplugged. [email protected]

Please count red light flashes and let me know. There would be long pause between flashes so count pause to pause. It is an error code of TV problem.

I found it!

I managed to fix it by reloading the firmware.

I posted detailed instructions on my website at:

http://www.benjammin.net/www/pages/techtips/Toshiba-Regza-42HL167.html

I hope this is still useful for others. It's so embarrassingly easy anyone can at least TRY it before calling a tech if they have any friends that are computer savvy.

-Ben

Hey there!

To find the code, get a pencil and paper, sit in the drivers seat and gaze at the instrument panel. insert your key in the ignition. (do not turn) Look at the dask and watch the area where the "check Engine" light comes on.. turn the key on-off-on-off-on (semi quickly) do not start the engine.
leave on . the engine light will start flashing. it's like morse code. it will flash a set of numbers then another, then pause, then next number and next, pause (for instance if it is a code twelve, it would flash as follows.. * (short pause) ** (longer pause) if there are other codes, it wil flash them too. so if there were say two codes, say 34 and 35 , it would flash as follows, *** (short pause) ****, (longer pause) ***(short pause)***** ( longer pause) it takes a little to watch the codes and write at the same time. sometimes helps if you have one person watch the light and one write the codes. If you miss one, don't worry it usually repeatseach code three times. if you can't get it quick enough, turn the key off, then wait two - three seconds and try again. let me know wha the codes are and I'll try and help you. good luck.