At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Hi, this means that there is no signal from the CPU to your monitor.
Was there any beep sound when you turn ON your monitor? How many beeps and was it a long or short beep? Is there a orange or green light on your Monitor? Is there a orange or green light on your CPU?Hi, this means that there is no signal from the CPU to your monitor.
Was there any beep sound when you turn ON your monitor?
How many beeps and was it a long or short beep?
Is there a orange or green light on your Monitor?
Is there a orange or green light on your CPU?
You can't post conmments that contain an email address.
Re: How do I fix the NO Sync on my computer monitor?
Check your cable first. You aren't getting a signal from your video output, so make sure the video card is seated on the motherboard. If you have onboard video, then you may have other problems
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1. Loose VGA cable
2. Wrong driver installed or configuration made is out of monitor range
For loose cable you can fix it up from both ends, on CPU and on Monitor itself.
For second reason, we just have to delete display driver from Device Manager. Follow below method to delete driver
Start computer in safe mode. To start in safe mode, as soon the system boots up press F8 and select Safe Mode. After you log into the safe mode. Right click the "My Computer" icon on desktop, go to properties,
go to "Hardware" tab, Click on "Device Manager", go to "Display driver" and expland it, select the driver below the expanded "Display Driver" and press delete to remove the driver. Now restart the system and it will automatically adjust the display driver for you.
could be hardware failure but i would try buttons on front of monitor first. notice, usually green led on monitor is green, if it goes to amber, you are loosing sync pulse.
Pinout : Pin Name Direction Color Description 1 RED OUT Red Video (75 ohm, 0.7 V p-p) 2 GREEN OUT Green Video (75 ohm, 0.7 V p-p) 3 BLUE OUT Blue Video (75 ohm, 0.7 V p-p) 4 ID2 IN Monitor ID Bit 2 5 Gnd Ground 6 RGND Red Ground 7 GGND Green Ground 8 BGND Blue Ground 9 KEY Key (No pin) 10 SGND Sync Ground 11 ID0 IN Monitor ID Bit 0 GND=Color; NC=MonoMonitor ID Bit 0 12 ID1 or SDA IN Monitor ID Bit 1 NC=Color; GND=Mono Some systems only uses ID0 for monitor ID 13 HSYNC or CSYNC OUT Horizontal Sync (or Composite Sync) 14 VSYNC OUT Vertical Sync 15 ID3 or SCL IN Monitor ID Bit 3
It may be that the LCD monitor will not display all screen resolutions
so you may need to change your resolution to match the desired
resolution and refresh rate of the LCD. In your case the computer
should be outputting:
1024x768 pixels 60 Hz
You can change these settings by right clicking on the desktop and clicking properties and they're under the settings tab. Change the screen resolution by moving the slider to the recommended setting (1024x768)
and
under the advanced button click the "monitor" tab - make sure the screen refresh rate is set to 60 hertz (60 hz)
Hi, this means that there is no signal from the CPU to your monitor.
Was there any beep sound when you turn ON your monitor?
How many beeps and was it a long or short beep?
Is there a orange or green light on your Monitor?
Is there a orange or green light on your CPU?
×