I have a Sanyo VPC-S1085 camera that will let the shutter lens fully come out but the camera will turn off automatically, I've replaced the batteries with new ones and it doesn't fix the problem.

If you decide to reset the numbers, your camera will start numbering the new pictures from 000 all over again. This can cause problems when you try to download because your computer will think you've already downloaded pics with those numbers. Don't reset....your camera will continue to number the pics consecutively even after you download and empty the card.

May be you had it wet or dropped it.If wet just remove the battery and allow it to dry under a fan but NEVER TRY TO HEAT IT and then turn it on.If it's not the problem check the battery output and consider replacing with a new one if expired.

This usually means the camera is broken. When it was dropped the lens mechanism most likely broke. No one repairs cameras, so your best bet is to get a new one.

This blog explains the problem you're having, and things you can try to fix it.
http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html
They say about half the cameras can be fixed, trying their suggestions. Good luck, hope you're in the "fixed" half!

Two ways to reset a camera: 1. go into the menu and find "reset"...follow the on-screen instructions. 2. Remove the card and battery...press all the buttons...leave it alone for 20 minutes...insert the card and then the battery...turn it on.

You can post any video on Facebook but they only allow you to post two min worth of video at a time. I would post the video on youtube and then copy the link onto your Facebook page. Youtube allows ten min for each video you make so you get more time on youtube

This is SANYO VPC-S1080 User Manual.

If you find this helpful please vote with high rank.

My camera was showing lens error 12&25 and then shutting off. I tried gently trying to twist and pull the furthest out part of the lens and it popped back into place easily. It made a noise when it did this, and then i turned the camera off, and the lens went back in!! Completely fixed now!!

This is a fully automatic camera so it's not possible to set the shutter speed directly.
All you can do is to choose one of the "scene" modes according to the situation you want to capture:



You can download the manual from the link underlined in blue below:

VPC-E760

Please take a moment to rate this solution & let us know if the information given was useful to you - Good Luck!

My camera had the same problem it would turn off after i tried to take a picture and it would say lens error 112 all i did was put duracell batteries in it as soon as i did it worked it seems wierd but try it its cheaper than getting a new camera