Dishwashers Logo

Related Topics:

Posted on Feb 14, 2008

AEG 50760 Dishwasher shows Error Code 30

AEG 50760 shows Error Code 30 everytime it starts after about 10 seconds. Cannot clear error code. Have checked machine does not appear to be blocked. The user manual says "leak prevention system activated".

Please help.

  • 1 more comment 
  • mattmoss99 Feb 17, 2008

    Thanks. We tried this, tipping the machine forward to about 60 degrees and about a cup full of water came out. We put the machine back and after 3 days it is working fine.



    Thank you very much for your help.


    Matt

  • Anonymous Mar 17, 2014

    error code ,30

  • Anonymous Mar 20, 2014

    aeg favorit 60820 I have emptied water from washer by turning over and it worked a few times

×

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Hot-Shot:

An expert who has answered 20 questions.

  • Contributor 54 Answers
  • Posted on Feb 14, 2008
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Hot-Shot:

An expert who has answered 20 questions.

Joined: Feb 12, 2008
Answers
54
Questions
0
Helped
26176
Points
78

There is water in the base of the macine. lean it over to the side to get all of the water out then try again.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Are error codes standard for the same brand/ different models ? Are they standard between brands ? I have a AEG dishwasher model favorit 50879 sensorlogic that gives an error code.

Some companies share generic codes like 'Lw', for low water level or 'DL' for Door Lock. This might help, there are other sites when Googling 'make model error codes'.

AEG Dishwasher Error Codes ' Dr. Dishwasher

www.drdishwasher.com > manufacturer > error-codes
Error/Fault Codes for AEG Dishwashers with an LED Display Fault Code ,10 Symptom: Dishwasher not filling with water. Go to: Why is My Dishwasher Not Filling ...
0helpful
1answer

I have an aeg dishwasher showing error code 49 what is this and how do I fix it

Error code E49, generally speaking, at AEG dishwasher does not exist.

Dado
0helpful
1answer

Aeg 60870 dishwasher water not getting in. Error code.10

The most common cause of a fault "i10" is closed valve on the water supply line. So this failure indicates a problem with filling of water.
Possible error causes:
Closed water tap, Inlet valve faulty, inlet hose bent, softener system clogged, pressure switch or pressure switch hose obstructed or leaking, wiring from pressure switch to printed circuit board (PCB), wiring from inlet valve to PCB and finally PCB.

Dado
0helpful
1answer

Have an FO error on frigidaire dishwasher. anyone knows what this error means?

Hello Ermellina, thank you for your post!

If you are getting an error code "F0" on your Frigidaire dishwasher, it usually means that you are experiencing an issue with the water level. To clear the error code, you can reset your dishwasher. However, since you have already turned off the circuit breaker, at this point, I would recommend connecting with a professional appliance tech for a clear-cut diagnosis. Best - Z
0helpful
1answer

AEG F65070VI fitted dishwasher error code 46 & 30

This error is flood alert because of a leak in the tub. IT might be a seal but you have to remove it and drain it and lay it down to see and then you need parts.
2helpful
2answers

Aeg 60800 dishwasher showing c2 on panel,water still in bottom of dishwasher. will not start.

from other forum

Not pumping or pumping too slow. Check for blockages in pipework, filter and pump. If all clear, replace pump.
Curing the fault on these machines doesn't always get rid of the error code though. Some faults are locked in.
If you find this, post back and I'll try to help.

5helpful
1answer

Error code 30

i fixed the problem by tipping the machine over slightly, as suggested by other members, about a pint of water came out the bottom and it now seems to work perfectly.
Not finding what you are looking for?

2,062 views

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...