Have dell xps 410 was on a network took it off now pinter wont

Could be an issues with your adapter. What resolution are you trying to send to the projector? Try lowering your resolution.

Also, are the proper video drivers loaded on your machine?

Hello, look at this link, you should have installed the bottom driver, but take care! if you've got a LAN card as well, you might have got the MOBO one disabled in bios, so best to take out the LAN card, find out what it is and look for a driver for it, meanwhile, with it removed, install the LAN driver for the MOBO LAN port, (bottom driver on this link ) and see if it appears in your 'Network Connections' (Check in bios to see if it's been disabled, though)
Regards, nicam49
The link: http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=19&l=en&s=dhs&ServiceTag=&SystemID=DIM_PNT_9200_XPS_410&os=WW1&osl=en&catid=&impid=

It depends on the kind of connection the printer has. Most newer printers will have a USB connection. You can plug your printer into any open USB port on the computer. Some older printers will have a parallel connection (which looks wide and narrow). Your computer will have to have a parallel port for you to be able to use your printer.

Good luck.

there is a strong possibility that you have a video card failure.

Hi chocolate_gi

The first thing you will need to do is load the driver for that printer. You can get it HERE. After that, Vista should allow you to print.

Good Luck

Mark

you may have to add another print driver
if you still have the cd try to add a device from the cd if not you may either have to uninstall and reinstall software or add a printer in your control panel in either printers or printer and faxes--win xp

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00030408&cc=us&lc=en&dlc=en&product=303753

Go to this page and almost the whole way down and you will see how to print both sides, manually and automatically.
Hope this did the trick for you,
please leave rating..

Possibly the scanner head trying to reset. Could be a bad sensor or drive belt. Try moving the scanner head and cleaning the area. Check the belt for any breakage.

Seems to be a common problem with this model.

RDO

please reload the printer drivers and software and report back your findings

I HAVE PSC 2410 XI All-In-One AND Fax HP PSC 2410xi does not work PLEASE HELP