Imagemixer3 I can record videos to the camcorder hard drive, but the Imagemixer3 give me problems when I go to transfer the video to the PC. The program recognizes the camcorder attached, but freezes when I try to download the video into the PC. Thereafter, the application will not recognize the camcorder connection. I have to reboot the PC to start the process all over again. Any ideas? Pete Margaritis [email protected]

I have the exact same problem with my camcorder. I have the exact same problem with my camcorder.

same issue here. i am trying to figure out if it has to do with the amount of videos on the camera... i am experiencing issues with 39 scenes but when i had less I was able to download. i can't figure out how to get the scenes off, very frustrating!



The error says it does not recognize the format, then it can't recognize the camera connection same issue here. i am trying to figure out if it has to do with the amount of videos on the camera... i am experiencing issues with 39 scenes but when i had less I was able to download. i can't figure out how to get the scenes off, very frustrating!

The error says it does not recognize the format, then it can't recognize the camera connection

Hi,



I have the same problem of being able to import my videos into my computer but not being able to save them to the hard drive. Any help would be greatly appreciated. Hi,

I have the same problem of being able to import my videos into my computer but not being able to save them to the hard drive. Any help would be greatly appreciated.

Has anyone had a solution yet????? Imagemixer3 won't import my videos properly?? VERY FRUSTRATING!!!! Has anyone had a solution yet????? Imagemixer3 won't import my videos properly?? VERY FRUSTRATING!!!!

Yes, I have the same issue when trying to import video files from my Panasonic SDR-H200 using ImageMixer 3.I get an error message which reads, "IMxBrowser.exe has encountered a problem and needs to close blah, blah, blah" The error signature shows, App Name: imbrowser.exe, App Ver: 1.0.0.20, Mod Name: imbrowser.exe, Mod Ver: 1.0.0.20, Offset: 0002f885.
Apparently there could also be a conflict with other writing software installed on my PC, what could this be? Yes, I have the same issue when trying to import video files from my Panasonic SDR-H200 using ImageMixer 3.I get an error message which reads, "IMxBrowser.exe has encountered a problem and needs to close blah, blah, blah" The error signature shows, App Name: imbrowser.exe, App Ver: 1.0.0.20, Mod Name: imbrowser.exe, Mod Ver: 1.0.0.20, Offset: 0002f885.
Apparently there could also be a conflict with other writing software installed on my PC, what could this be?

I have the Canon FS 10 camcorder, and am attempting to upload videos I've recorded for the first time. The camera came with the ImageMixer 3 SE (for SD) software, and also the Canon Digital Video "solution disk". My manual (to the Canon camcorder) said to use the Image Mixer software to upload the videos I've taken to my PC. I pulled up the manual to the software (the pdf file) and it showed to click the option "[B]Save Files to PC[/B]". However, that button is "grayed out" and cannot be accessed. My only available options are "Browsing & Authoring" and "Exit". So, I chose "Browsing & Authoring", tried every combination, and STILL cannot figure out HOW to get my videos OFF my camera onto my computer.

I called the company where I bought the camera, they didn't know (why the software is not functioning properly). I can't find that support at Pixela's website. The only one I did find was only for ImageMixer 3 for MAC-- and I have a PC.

Any help here?? Why "Save Files to PC" would be grayed out and unusable? Thanks in advance. Becky in Oklahoma I have the Canon FS 10 camcorder, and am attempting to upload videos I've recorded for the first time. The camera came with the ImageMixer 3 SE (for SD) software, and also the Canon Digital Video "solution disk". My manual (to the Canon camcorder) said to use the Image Mixer software to upload the videos I've taken to my PC. I pulled up the manual to the software (the pdf file) and it showed to click the option "[B]Save Files to PC[/B]". However, that button is "grayed out" and cannot be accessed. My only available options are "Browsing & Authoring" and "Exit". So, I chose "Browsing & Authoring", tried every combination, and STILL cannot figure out HOW to get my videos OFF my camera onto my computer.
I called the company where I bought the camera, they didn't know (why the software is not functioning properly). I can't find that support at Pixela's website. The only one I did find was only for ImageMixer 3 for MAC-- and I have a PC.
Any help here?? Why "Save Files to PC" would be grayed out and unusable? Thanks in advance. Becky in Oklahoma

I had the same problem with a Vixia HF10 camcorder. My problem was that I was not opening the viewing screen when transferring files. I had it closed and it would not work. The camera must be plugged into the AC adapter, it must be on the movie viewing option, it must be turned on and the view screen must be opened BEFORE plugging in the USB cable. Once I did this I was allowed to import the movies.



Now, however, every time I try and play a movie, Imagemixer 3SE freezes up. Any advice? I had the same problem with a Vixia HF10 camcorder. My problem was that I was not opening the viewing screen when transferring files. I had it closed and it would not work. The camera must be plugged into the AC adapter, it must be on the movie viewing option, it must be turned on and the view screen must be opened BEFORE plugging in the USB cable. Once I did this I was allowed to import the movies.

Now, however, every time I try and play a movie, Imagemixer 3SE freezes up. Any advice?