SUPPORT NUMBERO AND LETS NOT AND SAY WE DID OK??

fixya is not operator or reverse directory ----you can google number or enter number and a few sites will pop up most are pay for all information or free for limited info

On every device is an unique serial number. So nobody even can guess what number was on yours.

Ok so u charged the battery with out removing the negative cable and you heated up your ignition module. Ok lets start with checking if you have spark coming out of your distributor either by the removing a spark plug and grounding with a screwdriver or from the cap. If you have a good solid spark then it is not electrical if you do not have any spark then lets check the fuel and see if your fuel pump is working and had pressure. Also I want you to check all the fuses not just for fuel especially the one for the ECM. then we move up the ladder from there, ok. Good luck.

soumds like you have a draw

IMEI Number is phone specific NOT Network/Sim card Specific You cannot find IMEI by phone number Or Phone number by IMEI
Sorry.

batteries: are you using Li ion batteries that are charged up?

La unica manera de agarar el codigo va hacer de quitar el radio y ver el numbero de serial del radio y llamar al dealer

That is a very interesting question. Lets take a look at how rice is cooked. We bring the water to boiling (212F) then we dump the rice in. The temp drops to Xf. 20 minutes are allowed for full cooking cycle. So lets see. Cooking temp= 212f - fdrop= 52f=160f(hot coffee) for 20 minutes = perfectly cooked rice. Any more questions? OK when do we eat?

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

ok ok its a long story now so please lets follow these steps:

click start
click run
type cmd and click ok
type the following line and press enter with the end of each line:
ipconfig /flushdns
ipconfig /renew
netsh winsock reset
netsh firewall reset
regsvr32 wintrust.dll
regsvr32 softpub.dll
regsvr32 initpki.dll
regsvr32 mssip32.dll
regsvr32 msxml3.dll
regsvr32 msxml4.dll

now lets go to start
click control panel
click network connection
RIGHT click on wireless connection icon and select properties.
in the middle there is install button, click it.
select tcpip protcol and click add
in the next window click have disk (its to the right side).
change the path to C:\windows\inf now hit enter.
select tcpip v4 and click install.

now reboot the computer.

hope that will fix it for u

let me know what happened with u

cheers