NEC Topaz Office Phone- We are going away on a staff retreat and are wanting to forward all calls to a mobile. How?

Page 10 of the manual which is the second sheet down on the right hand side.

https://manualzz.com/doc/2126665/nec-ip2at-12txd-phone-telephone-handset-black---topazmltu...

How to Forward Calls on an NEC Phone

Rhode Island Telephone https://www.ritelephone.com > how-to-forward-calls-o...
Press Speaker · Dial 741 · The display will read: 1 to set or 0 to cancel. Press 1 and enter the extension number that you want to forward your number to. · Press ...

.. NEC Videos

https://ideacom.org/wp-content/uploads/SV8300-Terminal-Guide_-r4.pdf

https://ideacom.org/wp-content/uploads/SV8300-Terminal-Guide_-r4.pdf

The phone people in the office should be able to turn off call forwarding and auto answer



Call Forwarding

Call Forwarding - NECDSX.com

www.necdsx.com/dita/features/call_forwarding/call_forwarding_feature.html

1. Cached
2. Similar

Call Forwarding permits an extension user to redirect their call to another ... in the Call Forwarding programming mode - the same as pressing INTERCOM and ...

Thank - you but I have found a company from whom I can buy a NEC cordless phone. Have a good day.

Sounds like an IPK2. try just entering the forward destination in the first 2 fields. Why would the person being forwarded need calls? If you are forwarding his phone he can't receive calls. unless your just forwarding to vmail. cheaper rates at ldtsnj.com

Who provides your dial tone? You will have to find out their code for forwarding calls to a cell.

SBC/AT&T/Ameritech uses #72, then dial the number you want to forward to

How can download user manul for this phone?
NEC IP2AT-6TXD TEL2(BLK)

Feature 69 feature.

I am making the assumption that only line 1 has caller-ID. Both of my suggestions require services on the phone lines themselves, and not thru the phone system.

1. Line 1 needs features on the line to allow three-way calling. Then you would hit the Recall key after answering to send a Flash to the Central Office to dial the 2nd number. This takes the transfer away from the phone system and puts it on the CO. This requires more time and effort on the staff answering phones, and if a calls comes in while this is in progress, it's going to roll over to another number in the hunt sequence anyway.
2. Get Caller-ID on all lines.

Type * 71029 then your mobile number and end with a #

thats the code.