If you have installed the ceramic balls in your Medicool 20K Pro Drill, and now it is not working, you may need to perform the following steps to fix it:
- Remove the handpiece from the control box.
- Unscrew the two small screws on the front of the handpiece.
- Gently remove the front cover of the handpiece.
- Remove the two ceramic balls from the spindle.
- Reassemble the handpiece by replacing the front cover and securing it with the screws.
- Reconnect the handpiece to the control box and test it.
If the drill still does not work, it may be a problem with the control box or another component. In that case, it may be necessary to contact the manufacturer or a professional repair technician for further assistance.
×