Audio Players & Recorders Logo

Related Topics:

K
Karen Barrow Posted on Sep 30, 2017

I have a GPX S7695 Home Stereo and it won't turn on with or without the remote. Is there a reset button on it?

2 Related Answers

Anonymous

  • 1 Answer
  • Posted on Jan 29, 2008

SOURCE: iLo 42 inch plasma - stereo mode

I hope you purchased the warranty, because your TV is DONE.

My sound went out 3 days ago and Purchased the TV in July 2006. For a while my screen look like it was going bad and now the sound is gone. Since I purchased the Warranty (listen to this crap). The are sending me a box though U.S. Mail to my home. I then pack the box and take it back to the Post Office and send my TV to New York for Repair. Then the repair will take place and they will ship my TV back from New York to Los Angeles. Unless it is beyond Repair. Then they will take another 30 days to process the check and mail it from New York to Los Angeles,



At this time I can only laugh at myself for bying a non-name brand TV to save money.

Ad

Anonymous

  • 6771 Answers
  • Posted on Jun 24, 2012

SOURCE: Gpx stereo cd won't work

The laser pickup head has failed, or the pladder motor that spins the disc is open, or there is no voltage to the motor. Chances are the whole assembly will need to be replaced, but as a rule it is cheaper to replace the stereo.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Reset a Kenwood 8070 without a remote?

To reset a Kenwood 8070 receiver without a remote, you typically need to locate the reset button on the device itself. This button is often small and recessed, so you may need a paperclip or a similar tool to press it. Consult the user manual or look for the reset button near the power or input/output ports on the receiver. Once located, press and hold the reset button for a few seconds until you see the receiver reset. Keep in mind that this process may vary slightly depending on the specific model of the Kenwood 8070 receiver.
0helpful
1answer

How do I get the sound back on my gpx?

You pressed the 'MUTE' button on the remote. Press it again ONCE. Don't double press it for luck, or that puts you back to MUTE.

Televisions - In Home - GPX

https://gpx.com > in-home > televisions
Shop top electronics from GPX. ... Portable Audio Devices, Clock Radios, Televisions, and more. ... Add to Compare. 43" Ultra HD LED TV (TU4348B) FRONT.
1helpful
1answer

How do you access stored radio stations on my gpx hm3817dtblk

To cycle through the saved radio station frequencies, press the Play/Pause/M+ button on the remote or on the HM3817DTBLK. On the remote, this is the middle button in the third row (between the tune/skip/search - and tune/skip/search + buttons). On the music system, this is the third button to the right of the LCD display.

This is described in the manual which is available from the product page: https://gpx.com/in-home/home-music-systems/hm3817dtblk.html . Scroll down and click on Downloads. The manual is the first link. The direct link to the manual is https://gpx.com/amfilerating/file/download/file_id/49096/ . See page 4-5 (page 2 of the PDF).

I hope this helps.

Cindy Wells
0helpful
1answer

My remote for my stereo, HM3817DT won't work. It

Clean the battery terminals with a Q-Tip and rubbing alcohol and replace the batteries, if no change! take it to a Tv repair shop to have it tested and repaired if possible.
1helpful
3answers

How do I reset my yamaha receiver htr5730

http://www.retrevo.com/support/Yamaha-HTR-5730-Receivers-manual/id/1075bh230/t/2/

Page 52

1 Hold down STEREO on the Front Panel
"Factory Preset" appears on the front panel
2 Press STEREO to select the desired setting.
'Reset' To reset to factory presets
'Cancel' to cancel without making changes
3 Press STANDBY/ON to confirm your selection
0helpful
1answer

How do you program the cd to the GPX home stereo system

How do you program FM stations on the old model GPX s7794 model. I do not have a remote. Thank you!
0helpful
2answers

Kenwood amplifier

A home stereo system is not complete without an amplifier which drives the speakers. A preamp cannot drive a speaker. Try to read the labels at the back of the system...if it reads speaker then that is the amplifier output. Would you mind giving us what model is your system?
0helpful
1answer

Durabrand CD Home Music System - Volume default

HM3817DTBLK:Default volume

I sent a note to the manufacturer. Communication attached below.

Dear Customer,
We thank you for your interest in GPX and our products. We apologize, but the volume level on the unit is a factory setting that we are not able to override or alter.
Once again, we apologize for any inconvenience this may have caused.
Best Regards,
GPX Consumer Service

>>> "Chris" 12/27/2008 2:02 ">[email protected]> 12/27/2008 2:02 >> PM >>>

The default volume is set way too high on this radio. It is at 17 and we would like to reset it to a much lower level. How do I do this?

Chris
Not finding what you are looking for?

215 views

Ask a Question

Usually answered in minutes!

Top GPX Audio Players & Recorders Experts

SmartAviator
SmartAviator

Level 3 Expert

1124 Answers

Cindy Wells

Level 3 Expert

6688 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a GPX Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...