Can I pair my headphones to a device otherd than my phone?

Make sure the headphones are in the searchable mode or try searching from the headphones instead of the PC.

I don't think you can pair two devices at the same time. You will have to pair one at a time . On the phone go to connections and bluetooth , switch bluetooth on and make sure it is visible. Press scan for devices .your headphones should be shown in list if they are set to visable .press pair and a option to put in a 4 digit code willcome up type in a code and put same code in the headphones and press pair these devices. Do the same with the ipod but type in a different code and put code for ipod in headphones pair devices . You should be able to listen to either one

After charging, turn on headset by pushing the power button until the charging led turns red and flashes. continue to hold the button until the light flashes red and green. Go to your phone or device bluetooth settings page and search for devices, it should show up as TPRO HP500BT. Select device and select to Pair with this device. The light should start flashing red really fast, then it should be paired!

1. On the phone's main standby screen, tap the area next to the battery life indicator in the top right corner, then select the two horizontal arrows. You should now see the Connectivity menu.

2. Select "Bluetooth".

3. Make sure the section marked "Bluetooth" is set to "On".

4. Select the Paired Devices tab at the top of the screen (it looks like two "B" logos with wavy lines between them).

5. Select "Options".

6. Select "New Paired Device".

7. Switch on your Bluetooth headset or headphones, and make sure they're in pairing mode. If you're unsure how to do this, consult the manual that came with the headset/headphones.

8. Select "More Devices".

9. If your headphones appear on the list, select it. If they aren't found, try moving the headphones nearer to the phone and select the "Try Again" option.

10. The 5800 should now complete the pairing process with the headphones. (If it asks for a numerical code, you should find it in the headphones' manual.)

11. The 5800 will ask if it's okay for the headphones to connect to your phone automatically in the future. We strongly recommend saying yes because it saves a lot of bother.

12. Select "Yes" again to connect to the headphones immediately.

Delete the device from the phone, then re-pair the headphones with the phone. If you just turn on the headphones, the device cannot connect because the headphones store the information that you already deleted it on the phone. To pair again with the other device (like a computer, phone, etc) you need to turn off the headphones, then turn on the headphones but press the power/pair button and hold until the led flashes red and blue (like 10 sec after the led turn only blue) to put it in discovery mode. Then turn on your phone and follow the instructions for finding (discovering) your bluetooth headset.

Good luck from Headsets Direct!

Pairing Your Headphones and Phone/Device

1 Turn on your phone’s or device’s Bluetooth® feature.
2 With the headphones powered off, press and hold the Power/Pairing button until the LED indicator flashes blue and red.
3 Use the phone or device menu to search for the Bluetooth headphones and select 9xxBackBeat.
See your phone’s or device’s user guide for more information.
4 If prompted, enter 0000 for the PIN code/passkey.
Some phones also require that you accept the connection. Pairing is successful when the LED indicator flashes blue.
(from plantronics website)
-The Determined Observer (TheDeterObs)

Pairing Your Headphones and Phone/Device

1 Turn on your phone’s or device’s Bluetooth® feature.
2 With the headphones powered off, press and hold the Power/Pairing button until the LED indicator flashes blue and red.
3 Use the phone or device menu to search for the Bluetooth headphones and select 9xxBackBeat.
See your phone’s or device’s user guide for more information.
4 If prompted, enter 0000 for the PIN code/passkey.
Some phones also require that you accept the connection. Pairing is successful when the LED indicator flashes blue.

(from plantronics web site)

The problem is not with the phone. You have to set the headphones to be visible to your cell phone. Look in the headphone instructions for the procedure to pair with a blue tooth device.

Hi,
If you have lost the pairing on your phone with the headset follow these simple steps below:
• Setting the headset into pairing mode
1) Ensure the headset is fully charged
2) The headset must be switch off
3) Press and hold the on button for +- 8 seconds until the light flashes red-blue
4) The headset is now in pairing mode
• Searching for the headset on the phone
1) Go to “settings” or “connections”
2) Select Bluetooth, then options
3) Select Devices and click add
4) The phone should search for any available Bluetooth devices and display what was found
5) Select the Motorola device and click add
6) You will be required to enter in a pass code which is standard ‘0000’.
7) If successful then the headset will start flashing BLUE every few seconds.
8) If it’s a Samsung or Nokia phone you will need to “AUTHORIZE” headset on the device.
• The headset is now paired with the phone

Hope this helps

You will never be able to pair the d200 to a phone or another device, for this is a a2dp bluetooth dongle, that´s why it works with your headphones.