Lost password for Samsung video cameras model sdr- c75300n how to factory reset

Try this

How to COMPLETELY reset the SAMSUNG SDR-5100N when you`ve forgotten the password and it isn`t the default:
1) Make sure you are just seeing screens on the monitor
2) Push the [DVR] button on the remote so you will send the right commands
3) Enter the following seven key sequence in your remote control [FREEZE] [ALARM] [FREEZE] [ALARM] [FREEZE] [MENU] [ENTER]
4) A menu will pop up asking if you wish to do a factory reset your DVR (you do)
5) You will get a message that says "wait until your system turns off"
6) You will be asked to disconnect the power cable. You should do this for 10 seconds. When your system comes back on you can enter the default login of admin and 4321.

Samsung customer support is superb. You can call 1-877-213-1222 and choose option 2. It won`t list DVR`s starting with "SDR" as ones that can get support on that line, but it is indeed the right place. Hopefully now I`ve saved you 30 min on hold though.

Read more: How do I reset admin password on my Samsung sdr-5100N? - I forgot my admin password for my Samsung sdr-5100N so I need to reset my whole system./ OK OK ::

Ask Me Fast at https://www.askmefast.com/How_do_I_reset_admin_password_on_my_Samsung_sdr5100N-qna7634189.html#q4934265

videos as well

https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ALeKk03rhdW5Gx06g_ITz0cnrtrVhrM5YA%3A1613348627233&ei=E78pYO7eDezp_QbyybLgDw&q=samsung+sdr-5100n+forgot+password

..

Call 1-800-SAMSUNG (24/7) and they'll likely provide you the answer.

Follow the link. Samsung sdr c75300 forgot password mode and channel 2 key

Reset instructions will be in the manual

Samsung Security DVR Default Password

For nearly all Samsung Security DVRs, the default password is 4321. If it hasn't been changed since setup, then you can just use that to access the DVR. The default password is included in the reset procedures for completeness. If you have changed your password or access code for your Samsung Security DVR since it was setup, or if you changed it during the initial setup, use that password in place of the default password. The password will be the latest password that was set on the DVR. If no password has ever been set, then it will be the default.

Steps to Reset your Samsung Security DVR

Samsung Security DVR Reset Procedure #1

1. Reset the unit to factory by pressing both [MODE] and [PTZ] button for 5 seconds
2. Then enter the 4321.

Samsung Security DVR Reset Procedure #2

1. Reset the unit to factory by pressing both [MODE] and [CH2] button for 5 seconds
2. Then enter the 4321.

Samsung Security DVR Reset Procedure #3 This reset will work on Android based DVRs only. All steps are performed on the device itself.

1. Turn the device Off
   Wait 2 minutes
   Press and hold the following buttons
   • POWER,
   • HOME
   • VOLUME UP
2. The unit should power on. Once it does, you can release power.
3. Use the volume UP and Down buttons to select "Wipe/Factory Reset" from the recovery menu.
4. Activate the reset using the HOME button.
   When the DVR goes through it's setup again, it will be at factory defaults. The password will be 4321.

Samsung Security DVR Reset Procedure #4 This reset will work on SDR models. It may also work on other models.

1. With just the cameras showing, press the following in quick succession using the remote:
   • Freeze
   • Alarm
   • Freeze
   • Alarm
   • Freeze
   • Menu
   • Enter
2. Make sure you press them quickly, one after the other. If it doesn't work the first time, try doing it several times. It can take many tries to get the timing right. If/when it works, you should get a screen that gives you the option to reset.

Samsung Security DVR Reset Procedure #5 This reset will work on SDR models where procedure #4 failed. It may also work on other models.

1. Press the DVR Button to place the system in DVR Mode
2. Press:
   • Freeze
   • View
   • Return

As with Procedure #4, you may need to press Freeze, View, and Return in in quick succession a few times to get it to work. The timing can be tricky.

Samsung Security Reset Procedure #6 Courtesy Sergio Ayala
To factory reset the SDR-B74301

1. Reboot the DVR
2. Once the DVR has rebooted, enter the following sequence on the remote:
3. UP, RIGHT, 5, 3, 3
4. You will be prompted to do a factory reset. Confirm

This has been confirmed by several people. Thank you, Sergio! If this works for you, please thank him in the comments below.
CCTV Networking Technical Support

Feel free to ask here.

Have a look in the manual - there may be an option in the menu system.

By default, initial ID and password are set to "admin", and "4321

4321