Do I need to calibrate this model? Any other suggestions?

From the specification list in your instruction manual;
"-Software calibrated, no variable resistor adjustment".
Therefore it self calibrates or it doesn't function at all because it is software run.

I would suggest referring to the service manual for your machine. Using your make, model and serial number, you may be able to find this manual at the following link: Replacement Parts for Fitness Exercise Equipment at SPORTSMITH

Hello. Mitutoyo has both calibration and repair services if required.

Repair:

http://www.mitutoyo.com/template2.aspx?id=22

Calibration:

http://www.mitutoyo.com/template2.aspx?id=21

Hope this helps out. Thanks.

Enter calibration mode and do a calibration first.
Press the stop & speed up key, insert the safety key/magnet. Press stop 1 more time. Press speed up, the speed display should start to increase in value. By 30-40, the motor should be running. If not, you either need a motor or motor controller PCB. What model is the treadmill?? PCTL???

This thermostat is not field servicable,you cannot calibrate this thermostat.May want to consider moving it closer to return air of equipment, for more accurate sensing of building temperature. Why do you feel that it needs calibrated? Suggest setting another thermometer on top to verify its accuacy.

Hi Eli,
I suggest you to run the clear calibration utility from the devellopers:
http://www.wingmanteam.com/latest_software/gadgets.htm#Clear Calibration Utility:
Thanks and have a nice day !
J -

Set back to factory defaults and then re-calibrate.  Also, look for firmware updates for your model.  If the previous suggestions don't fancy you, then take the thing back to your phone provider for exchange as your digitizer is probably fu.k.d up from being dropped, exposed to liquids, etc.,,
Cheers.

You'll need to calibrate your screen and your printer - calibration is required for every set of paper and ink you use. It's quite a science and an art. I suggest you google "colour space" "printer calibration" "gamut" etc and read up on it. Alternatively you could spend a few hundred quid on a printer calibration tool, either the Colormunki or the Spyder print studio.

It still won't match perfectly, as the way color is created on a screen differs hugely for to how it is produced on paper.

Start with a properly calibrated screen first though (my money is on the Spyder elite screen calibrator and spyder print calibrator)

I'm a pro photographer and I print my own photos - full system calibration is the only way. www.yourhandinmine.co.uk

Steve Causon

Hello,

You can calibrate the oven on this model. Press the bake button, adjust the bake temperature up to 550 degrees and then press and hold the bake button until a 0 displays. Now you can adjust the oven temperature up or down to match the display.

Here is a repair manual link that you can use to download frigidaire repair manuals. The one for 30 inch freestanding ranges will have the section on calibrating the oven's electronic control.

Thanks

Same happened to my 3 month old TX. I just recharged it, and all was OK! Sounds strange at first, but in my hometown, it is very humid, so maybe it got some moist inside and that caused some variations in the power or battery or voltage... dunno, maybe you need some cleaning, or try to calibrate while plugged.

Hope to be useful!