Why has my DC59 stopped working? It is fully charged but cuts out after a second or two.

Dyson will replace the unit for free. Call customer service # on the vac with the serial number

Most likely you need a new battery. Over time they do tend to stop holding a proper charge

try washing the filter in the washing machine then try again

2nd battery does not seem to be a viable option, reduce the suction power if u require less and it should work for 25 minutes approximately. (hope u know it automatically stops when dust the cup is full)

Hi Alvina, it's Jack at Dyson.

DC59 will display a blue indicator light at the base of the hand grip while the machine is taking in power. The light will go out when the machine is fully charged. DC59 will take 3.5 hours to charge fully when the charge is completely depleted, but it will take less time than this if there is still some charge remaining on the battery after use.

Please note, the machine's intelligent control software is designed to ensure the battery only takes in enough power to recharge, and to keep itself topped up. It's safe to leave the machine connected to the charger at all times when not in use - the machine is designed to be stored in this way, so it's always ready to go when you need it.

From the information you've provided, I'm not clear on whether or not you're finding your DC59 works as normal once the blue charging light goes out, or whether it's not working at all. To make sure everything is correct, please get in touch with our experts directly. We'll be happy to talk you through some simple diagnostic checks when you have your machine easily to hand.

You can reach the Dyson Customer Helpline by calling 1-866-693-9766 (US), 1-877-397-6622 (CA) 1800 239 766 (AU), or 0800 298 0298 (UK).

We'll look forward to speaking with you.

Hi there, it's Jack at Dyson.

DC59's motor will make a rapid pulsing noise to warn you if something is stopping airflow from passing through the machine. The motor will then shut off for protection.

This should be quick and easy to resolve by checking the motorised floor tool, wand and bin inlet for blockages. It's also a good idea to give the washable pre-filter a rinse in cold water if this hasn't been done recently - we recommend washing it at least once a month. Make sure the filter is allowed to dry completely for at least 24 hours before replacing it.


I'm confident this will resolve the issue. If you would like further assistance after giving these steps a try, please call the Dyson Customer Helpline on 0800 298 0298 (UK), 1-866-693-9766 (US), 1-877-397-6622 (CA) or 1800 239 766 (AU).

Hi Jeff, it's Jack at Dyson.

The issue you're describing with your DC59 sounds very unusual, but I'm sure we can help. Like all Dyson cordless and handheld vacuums, DC59 is backed with our 2-year Dyson parts and labour guarantee.

When you have your machine fully charged and easily to hand, please give us a call so we can talk you through some simple diagnostic checks. You can reach us by calling 0800 298 0298 (UK), 1-866-693-9766 (US), 1-877-397-6622 (CA) or 1800 239 766 (AU).

We'll look forward to speaking with you.

Hi Sue, it's Jack at Dyson.

DC59 will pulse to let you know if something is blocking airflow from moving through the machine. You can resolve this easily by checking the floor tool, wand and bin inlet for any obstructions - the pre-filter may also need a wash. Just follow the steps shown in our video guide:


I'm confident this will resolve the issue, but if you'd like some further help from our experts after giving this a try, please call us directly on 0800 298 0298 (UK), 1-866-693-9766 (US), 1-877-397-6622 (CA) or 1800 239 766 (AU).

Hi there, it's Jack at Dyson.

From what you've described, it sounds as if you may be using your DC59 set to Boost mode. This will provide 6 minutes of highest suction for really stubborn dirt, but for regular vacuuming normal mode should work effectively.

To switch back to normal mode, ensure your machine is fully charged (this will take a maximum of 3.5 hours), then hold down the on/off trigger, and at the same time, press the illuminated Boost button on the rear of the machine.



You might also find our Getting started guide useful:


I'm confident this will resolve the issue, but if you would like some further advice from our experts after giving this a try, please give us a call on 0800 298 0298 (UK), 1-866-693-9766 (US), 1-877-397-6622 (CA) or 1800 239 766 (AU).

Push the reset and follow the manual info
the manual link is attached below

http://www.manual-hub.com/manuals/dyson-dc59-01-pdf-manual.html