My TV has lost the red tint so all the reds are yellow what can I do about this?

Adjust the tint, contrast and color settings on the TV remote control to determine if these changes solve the problem.
Read more: How to Troubleshoot a TV With Green Picture Problems ' eHow.com http://www.ehow.com/how_5387115_troubleshoot-tv-green-picture-problems.html#ixzz1goh6jjyV

Pictures still have colors shadows mixed into the tv picture wright?Yes?Tv still have and causes by convergence board as a problems.

A green tint to a tv means it's lost its red channel (may additionally be blue channel). Check that your video cables are connected fully. If that's not the culprit, and changing tv settings doesn't work, you'll need to take it to a repair shop; so they can repair the "red circuits:" Note: there aren't any "red circuits" per 'se, but there are circuits that tell the various computer chips - in the tv - how to handle the image. By "red circuits" I'm referring to these.

Need a new TV. Sorry.

Check all cables,replaced all cables if more than couple years old.After that the same,ur tv have one dead color gun,require service.

you can adjust in color mode. please balance the tint, color,brightness, contrast, & sharpness.

Sounds like the color wheel has gone bad and needs to be replaced. This is located behind the back panel.

Picture Menu
Picture Mode: Expert1
*Backlight: 16
*Contrast: 83
*Brightness: 53
Sharpness: 50
*Color: 55
*Tint: 0
Expert Control

• Fresh Contrast: Off
• Noise Reduction: Medium
• Gamma: Medium
• Black Level: Low
• Real Cinema: On
• TruMotion: Low
• Color Standard: HD (N/A w/HDMI)
• White Balance: Warm
• **Method: 10-Point IRE
  • 10 IRE
    • **Red: 1
    • **Green: 2
    • **Blue: -16
  • 20 IRE
    • **Red: -6
    • **Green: 0
    • **Blue: -7
  • 30 IRE
    • **Red: -5
    • **Green: 0
    • **Blue: -4
  • 40 IRE
    • **Red: -8
    • **Green: 0
    • **Blue: -4
  • 50 IRE
    • **Red: -4
    • **Green: 4
    • **Blue: -4
  • 60 IRE
    • **Red: -6
    • **Green: 6
    • **Blue: -5
  • 70 IRE
    • **Red: -8
    • **Green: 3
    • **Blue: -10
  • 80 IRE
    • **Red: -8
    • **Green: 7
    • **Blue: -16
  • 90 IRE
    • **Red: -9
    • **Green: 5
    • **Blue: -18
  • 100 IRE
    • **Red: -10
    • **Green: 4
    • **Blue: -9

Color Management System

• Red Color: 0
• Red Tint: 0
• Green Color: 0
• Green Tint: -15
• Blue Color: 0
• Blue Tint: 11
• Yellow Color: 15
• Yellow Tint: 2
• Cyan Color: -15
• Cyan Tint: 0
• Magenta Color: 0
• Magenta Tint: -1

lg70 nice tv excellent processor just to bad there is no intensity control on color management oh well still better than what the three s are pushing block out the hype lg will be number 1 in a few years haters are starting to come around and well leds coming,

p.s. i dont work for lg just tired of losers bashing stuff because they dont own it.
im isf certified those settings are right on the money straighter than a ruler

Colorimetre HCFR software
AVC HD 709 calibration disk
Spyder2 colorimeter (I know most prefer the Eye-One meters, but the Spyder2 was available from my job at no cost)

Here are the settings:

PS3 Blu-Ray player

Output Format (HDMI): Y Pb/Cb Pr/Cr (important!!! NOT RGB output)
BD 1080p 24hz Output (HDMI): On (this TV can reproduce video at 48hz for accurate 2:2 pulldown)
Y Pb/Cb Pr/Cr Super White (HDMI): On (not sure if this matters)

42LG50 Settings

Aspect Ratio: Set By Program (Personal Preference)
Picture Mode: Expert 1
Backlight: 50 (Personal Preference)
Contrast: 54
Brightness: 54
Sharpness: 40 (Personal Preference)
Color: 50
Tint: 0

Fresh Contrast: Off
Noise Reduction: Off
Gamma: Medium
Black Level: Low
Real Cinema: On

White Balance: Warm
Method: 10 Point IRE

10 (-3,8,-16)
20 (15,24,-21)
30 (20,36,-22)
40 (3,19,-40)
50 (8,34,-41)
60 (10,50,-20)
70 (-5,50,-8)
80 (-16,50,18
90 (-14,50,30)
100 (-22,38,21)

Red Color: -3
Red Tint: 0
Green Color: 10
Green Tint: 0
Blue Color: 14
Blue Tint: 0
Yellow Color: 0
Yellow Tint: 1
Cyan Color: -11
Cyan Tint: 0
Magenta Color: 0
Magenta Tint: -2

Take time to get used to the settings, you may think the screen looks dull at first. The truth is most people have way too much contrast on their TVs.
These settings will also work for Cable or Dish hookups, in which case you may change the Noise Reduction option to Medium to reduce signal noise.

OR....

2POINT IRE

Backlight: 65
Contrast: 55
Brightness: 45
Sharpness: 50
Color: 45
Tint: 0

Fresh Contrast: Off
Noise Reduction: Off
Gamma: Medium
Black Level: Low
Real Cinema: On

White Balance: Warm
Method: 2 Point

Red Color: 3
Red Tint: 0
Green Color: 9
Green Tint: 2
Blue Color: -1
Blue Tint: 0
Yellow Color: 6
Yellow Tint: 5
Cyan Color: -1
Cyan Tint: 1
Magenta Color: 2
Magenta Tint: -1

if you have hd cable or satellite box make sure the component cables are properly connected(green red and blue) and matching same color in source (cable box or satellite and tv as well)
also make sure in tv menu that color and tint are 50%