Singer sewing machine Model 9134, problem trying to put the bobin case back in after cleaning, how do I put it back together?

hi there.
not sure if the manual will help you out,but go to this link and have a read up.
Singer 2263 Instruction Manual Page 14
or this on a youtube video.
.
How to pull apart and reassemble the bobbin case area on front loading...
or this video.
How to Fix and clean the bobbin case area on your own sewing machine

if none of the above help try this link.
singer sewing machine model 2263 bobbin case is disassembled need...

Go grab that many by the ear and drag him back in there and make him put it back together.

or... use this as an excuse to go buy a seriously expensive new sewing machine.

Go to the singer website
Go to the home page
Go to customer service--click on it--it will show a small menu--click on instruction manual
In the box put the model number (example 9134 ) & click search

A free, downloadable manual for the Singer #9134 can be found here: http://www.managemylife.com/mmh/lis_pdf/OWNM/1006499L.pdf
Sears has an excellent, easy-to-use catalog of your machine's parts for sale. You can find those parts at: http://www.searspartsdirect.com/partsdirect/part-model/Singer-Parts/Sewing-Parts/Model-9134/1232/1220000
If you find that Sears is missing a part that you need, you can look up that part in this manual, record the serial number of the part, and continue your search at another authorized Singer retailer: http://parts.singerco.com/CPpartCharts/9_99999/9134.pdf
Good luck with the refurbishment of your newly acquired Singer!

The manual usually shows a pretty good diagram of how it should be, it snaps in place. Call singer at 1-800-4singer. Or go online at singerco.com and download a manual for free,

The plastic bobbin case should sit on top of the raceway, it should slot in quite easily, once the bobbin case is in put the small metal clip at the top over to hold it in place.

I had the same problem and I tried everything including removing the bobin case, cleaning out lint, changing the needle, adjusting the tension but it did not work. Then I finally tried reloading the bobin thread, making sure to load the bobin according the manual directions....and the problem was solved...no more tangles... just a nice even stitch...yeah!

Hi, I used to have the same problem. I pulled the whole bobin casing out, cleaned it oiled it. When I put it back in, I made sure the actual bobin was turing the right direction so the cotton didnt snag and pull casing up.

If you havent already tried this give it a go.Its amazing how much gunk gets in there.

bobbins come in different sizes,try a larger size

i think your putting in your bobin backwards,
to check put your bobin in and hold bobin , and bobin case by thread if it unrolls its backwards,
hope this helps!!