I need ang diagram for hobart mixer 9 out wire T1/T2/T3 AND T4/T5/T6, T7/T8/T9 which is the right partner of t1/t2/t3???

One needs to know what the voltage and phase(1 or 3) the unit is and what the power supply is.

Take a look at:

http://www.diversewebsitesolutions.com.au/hf/manuals/FOOD%20PREP/MIXERS/CURRENT%202011%20MIXERS/HOBART%20HL600/HOBART%20HL600%20MIXER%20TECHNICAL%20AND%20SERVICE%20INFORMATION/

You cannot wire a three phase motor for single phase and you cannot wire a single phase motor for three phase. If you have a three phase dual voltage motor your options are 220 or 440 volts. If you have a single phase dual voltage motor your options are 120 or 240 volts. A 208 volt Hobart motor will only function correctly on 208 volts and is not dual voltage.

Parts manuals are available for viewing and free download at www.hobartservice.com

need ml# to help,always include ml# with any hobart equip.

i read in the manual that the wiring diagram is located on the inside of the top cover. check it out..

good luck

the elec. schamatic for the p-660 should be inside the top cover of the mixer, that mixer was specifically built for s'barros pizzerias

how do you know diagram is wrong , you could have wired it wrong the timer kit i belive comes with 3 or 4 different diagrams for that mixer you need to pick the right one

it requires 3 phase with ground it is a four wire system

I had a look on google and came up with a service manual. not sure if this has the wiring diagram but the only other thing i can suggest is to contact te manufacturer direct. Go to http://cgi.ebay.com/HOBART-A200-20-QUART-MIXER-SERVICE-PARTS-MANUAL_W0QQitemZ160203114233QQcmdZViewItem
hope this helps.