Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

WT960 hotpoit washing machine shows F10 and stops

Stops and flashs F 10

1 Answer

D. E. Hev

Master 1,187 Answers
Posted on Apr 06, 2015

D. E. Hev

Master

Joined: Nov 24, 2007

Answers

1187

Questions

Helped

424880

Points

5819

* F01 - Short circuit motor traic - Book a service engineer.
* F02 - Motor jammed or fan blocked - Book a service engineer.
* F03 - Front thermistor open/short circuit - Book a service engineer.
* F04 - No pump piloting - Book a service engineer.
* F05 - No feedback from the pump - Book a service engineer.
* F08 - Static heater relay with contact welded closed - Book a service engineer.
* F09 - Eeprom is not programmed or not functioning - Book a service engineer.
* F10 - Common of heater open or one shot open - Book a service engineer.
* F11 - No pump connection - Book a service engineer.
* F12 - Communication error between boards - Book a service engineer.
* F13 - Rear thermistor open/short circuit - Book a service engineer.
* F15 - Dynamic heater relay with contact welded closed - Book a service engineer.
* F-17 - Master relay welded closed - Book a service engineer.

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

Hotpont washing machine wt960 fo8 code m/c stop

I believe F08 Error code is for a Heater fault
Issue: During a wash cycle the programme pauses part way through.

Read full answer

Nov 20, 2014 • Hotpoint Washing Machines

0helpful

1answer

Hotpoint aquarius wmf560 flashing f10

F10 - No cold fill. Check that the taps are on or if the drain hoses are kinked.

Read full answer

Dec 07, 2012 • Hotpoint Washing Machines

2helpful

1answer

My hotpoint Ultima WT960 washing machine is diplaying the fault code F - 10 just after the eash cycle has started Do you know what this fault code means?

F10 - Pressure switch not sensing correctly

Read full answer

Sep 28, 2011 • Hotpoint Ultima WF860 Front Load Washer

0helpful

2answers

My hotpoint WT960 stopped filling and displayed F10 error please help

Hi from retired Englishman in SW France,
'F10' for Indesit (Hotpoint, Ariston) decodes as 'pressure switch, check PS, wiring and module' which sounds major BUT is not uncommon in this make of machine and is often caused by poor contact between plugs/ cables and the control PC, just needing re-seating- by an engineer ;-0(

If this has assisted and/or clarified the situation for you please consider a 4 thumbs up on our rating.
Thanks and good luck!
John C

Read full answer

May 28, 2011 • Hotpoint Washing Machines

1helpful

1answer

Washing machine stops and flashes 4E

1. WATER SUPPLY ERROR – Display shows 4E.
Water Supply Error occurs when water level frequency does not show changes more than 100Hz or water is not supplied up to the preset water level after 10 Minutes or more at the time of initial water supply. The error status can be cleared by turning the POWER switch OFF and back ON.

Read full answer

Feb 23, 2010 • Washing Machines

16helpful

3answers

Hoover HNL7166 'Start Delay' light flashing

Hoover (Nextra series) washing machines

The 'Start' & 'Pause' LED's will flash together to indicate the error code. You have to count the flashes within each 15 second period to get that error code. The start and the pause LED's will flash together at 1Hz (i.e 1 flash per second) within that 15 second time frame, then will continue and show again within another 15secs and so on.

1 Flash = Interlock fault
2 Flashes = Fill time-out
3 flashes = Drain time-out
4 flashes = Overfill fault presure pipe blocked
5 flashes = NTC error
6 flashes = faulty control board
7 flashes = Motor jammed
8 flashes = Tacho fault
9 flashes = Motor triac on module board
10 flashes = Prog Selector or wiring fault

Read full answer

Jul 27, 2009 • Washing Machines

7helpful

1answer

Hotpoint ultima wt960

F10 means that the water level switch is not sensing the correct water level, this can be caused by faulty switch, a blockage in the pressure system, a blocked drain pump or filter.
It is a process of elimination I'm afraid.
Please rate my suggestions to solve your problem.Thanks.

Read full answer

Mar 01, 2009 • Hotpoint Ultima WF860 Front Load Washer

3helpful

1answer

Hotpoint ultima wt960

this m,eans the water is not entering the machine it iseither the inlet valve or water off at tap

Read full answer

Dec 21, 2008 • Hotpoint Ultima WF860 Front Load Washer

4helpful

1answer

Hotpoint wt960

Full manual can be downloaded from this link

http://imagebank.indesitcompany.co.uk/brochures_online/pdf/Hotpoint/Laundry/ultima-7kg-lcd-wm-19505771900.pdf

Technical helpline will be able to tell you what F10 means

Read full answer

Apr 04, 2008 • Hotpoint Ultima WF860 Front Load Washer

Not finding what you are looking for?

View Most Popular

Washing Machines

Hotpont washing machine wt960 fo8 code m/c stop

Hotpoint Washing Machines

231 views

Ask a Question

Usually answered in minutes!

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual

Related Topics:

Trustworthy Expert Solutions

WT960 hotpoit washing machine shows F10 and stops

1 Answer

D. E. Hev

Add Your Answer

Attachments: Added items

Related Questions:

Hotpont washing machine wt960 fo8 code m/c stop

Hotpoint aquarius wmf560 flashing f10

My hotpoint Ultima WT960 washing machine is diplaying the fault code F - 10 just after the eash cycle has started Do you know what this fault code means?

My hotpoint WT960 stopped filling and displayed F10 error please help

Washing machine stops and flashes 4E

Hoover HNL7166 'Start Delay' light flashing

Hotpoint ultima wt960

Hotpoint ultima wt960

Hotpoint wt960

Not finding what you are looking for?

Washing Machines

Hotpont washing machine wt960 fo8 code m/c stop

Ask a Question

Top Washing Machines Experts

Brad Brown

Cindy Wells

john h

Are you a Washing Machine Expert? Answer questions, earn points and help others

Manuals & User Guides

Sman_22s750n_22s950n_36s550n...

BOSCH WFL 1262 ZA.pdf....

BOSCH WFL 1262 ZA.pdf....

Related Topics:

Trustworthy Expert Solutions

WT960 hotpoit washing machine shows F10 and stops

1 Answer

D. E. Hev

Add Your Answer

Attachments: Added items

Related Questions:

Hotpont washing machine wt960 fo8 code m/c stop

Hotpoint aquarius wmf560 flashing f10

My hotpoint Ultima WT960 washing machine is diplaying the fault code F - 10 just after the eash cycle has started Do you know what this fault code means?

My hotpoint WT960 stopped filling and displayed F10 error please help

Washing machine stops and flashes 4E

Hoover HNL7166 'Start Delay' light flashing

Hotpoint ultima wt960

Hotpoint ultima wt960

Hotpoint wt960

Not finding what you are looking for?

Washing Machines

Hotpont washing machine wt960 fo8 code m/c stop

Ask a Question

Popular Questions

Whirlpool Duet Sport Washer will not drain - F-21 error

Black stuff in washing machine

F 11 error code on Whirlpool Duet - Serial Communication Error ?

Whirlpool cabrio error code f51 what does it mean?

Washing machine will not drain

Top Washing Machines Experts

Brad Brown

Cindy Wells

john h

Are you a Washing Machine Expert? Answer questions, earn points and help others

Manuals & User Guides

Sman_22s750n_22s950n_36s550n...

BOSCH WFL 1262 ZA.pdf....

BOSCH WFL 1262 ZA.pdf....