How do i get a itp180B RS 2.1 channel bar speaker remote?

Could you be more specific. What are you wanting to hang?

I'm sorry. I repair only the hardware, not the usage of the product. Your best bet to answer your question, would be to get a hold of the manufacture,

http://www.manualslib.com/manual/257417/Ilive-Itp280b.html

Find code to my ilive sound bar

Is the sound distorted? For more information, or to inquire about a repair, please visit my website at audioserviceclinic.com. You may contact me directly though the website. Thank you.

You would have to install a speaker selection switch. You cannot directly hook up 2 amplifiers to one set of speakers without destroying one or both amplifiers. Unfortunately, one set of amplifiers is inside your sound bar. An external switch would have to be installed on your sound bar as well as speaker terminals that would connect to your Fisher.

If you have a line out or tape out on your Fisher, and you have an analog input on your sound bar, use could use that as an alternate solution. For more information, please visit my website at audioserviceclinic.com. Thank you.

http://www.timewarnercable.com/en/residential-home/support/faqs/faqs-tv/tvtroubles/set-topbox/how-do-i-program-my-cable-remo.html

Sound issues and answersa short list:

sound on set or a box muted or turned down?

speakers inside the set (see menu) switchedon or off?

internal/external switch somewhere in or on back of set?

Clearly it could be a audio problem (a model number?) but explore all here thatyou have not already done--make sure theremote set to TV and look for a button on it marked MTS and if there cycle it.

You can also determine if same trouble when you play a DVD.

Hi Scott, my name is Cheri Torres and I work with the DISH Network Internet Response Team. I came across your post and wanted to help! I will list here for you the best code for your iLive sound bar and also the instructions for addressing the remote to your sound bar. I hope you find this information useful and if you have further questions please let me know!

The best code 2835

The instructions for addressing the remote.
1. Press and hold down the AUX button until all the other mode buttons light up.
2. Enter the code 2835.
3. Press the pound(#) button once.
4. Test the functionality of your iLive sound bar.

With the power off push the clock button on the remote.