HP PSC 2175 All-In-One InkJet Printer Logo

Related Topics:

Posted on Mar 04, 2017

Hp 2175 all-in-one suddenly flashing light and leaving message

I have a hp psc 2175 all-in-one printer that suddenlyhad the copy scan photocard lights start flashing and the message remove and check cartridge in the printer window.
Things I have tried---at least 3 times
1. I did ck.the cartridges many times and even put new ones in
2. Unpluged the printed from the wall and from the computer to try to reset it
3. re-booted my computer
As I mentioned I have done these things many times
4. unplugged printer --- held down cancel and left arrow button, replugged it while still holding buttons--read this would send a message back that it would reset printer, but this did nothing.
I (like eveyone else) am desperate to get it going

I have wireless networking---won't print from either computer
right now the printer icon shows an error and that it is sharing
The computer and the printer are communicating , in so far as when i give a command to print something it does go to the queue, but from there it will not print
I would really appreciate any help I can get
Thanking you in advance
Joan W.

5 Related Answers

Anonymous

  • 2961 Answers
  • Posted on Mar 16, 2007

SOURCE: Operator Error Message

Firstly most printers need to be told when you have re installed cartridges as they think they are still there from the fault. Go to your printer and faxes menu and select your printer and delete any pending print jobs. Next go to add/remove programmes and delete the printer software driver and disconnect printer from both pc and the mains for about minutes. Re install driver and reconnect printer to pc when prompted by driver or when it is fully installed, prefferably in a different usb port than previous and go through the set up as normall. if the same problem occurs, the printer must be faulty and require a repair or replacement.

Ad

Anonymous

  • 29 Answers
  • Posted on May 11, 2007

SOURCE: HP PSC 1210 Not Printing

Hi My first quesiton to you would be: What version of windows are you using. If you are using Windows Vista you will need to go to the HP Site and download the new updated drivers for the new OS. Second Question : Are you using genuine HP printer catriges? If so make sure the contact point where the catrigr and the printer meet are clean and free of dust. Try re seating the cartriges and re calibrating th printer. I checked with HP online tech support and they backed me on this. If you have any more trouble feel free to email me : [email protected] Have a great day.

Anonymous

  • 2985 Answers
  • Posted on Jul 01, 2007

SOURCE: Check ink cartridge error reading won't go away and can't use it.

Switch off the machine. depress all three buttons with the button depressed switch on the machine and hold the button in for a few seconds. Did the problem go away? No? try www.fixyourownprinter.com

Anonymous

  • 1 Answer
  • Posted on Nov 01, 2007

SOURCE: HP PSC 1350v Check Print Cartridge Light

Meanwhile I am on the crossroad.
If I buy a new cartridge I will have bunch of cartridges with now warranty that the printer is going to print again. ¨Hopefully there are some more types of printer suitable for the cartrigese (56,58 Anyway thanks for the time and efford to the wise woman
nové zámky

A

Anonymous

  • Posted on Jun 06, 2008

SOURCE: error code 6502 on MP510

Canon help desk told to unplug the printer for at least 15 minutes. The electronics will reset. If the error persists after turning the printer back on you're screwed and have to send it to Canon, because some electronic component is broken.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Everytime I start my printer I get a message to realign while there is NO problem with the alignment.

Hi,

The printer alignment has to be completed as below,

  1. After printer prints the alignment sheet.
  2. Place the printed sheet on the scanner bed and press "start scan" or "start color copy".
  3. Wait untill the printer Power light stops blinking.
  4. Now turn off the printer and turn back on.
  5. Printer will not print alignment sheet.
Regards
Riztech
2helpful
1answer

H P printer 2175 all in one---when it is turned on, a little bell sounds near the computer and the printer starts clicking, continues to click and the 3 lights, copy-scan and ink flash and then the...

If you are getting a sound from the pc, check in your taskbar for any notifications or icons to do with the printer and see what they are alerting you to.
0helpful
2answers

Driver software

Hi

Thank you for your query

Your problem statement does not give anyinformation but I am assuming you want the driver software for your printer

Please click on the link below to download and install the driver

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&lang=en&product=90809&

Regards
Shauqat
0helpful
1answer

Need software download for hp psc 2175 all in one for vista premium operating system

i donot have a disc to play so that i can print i can scan also i can copy but cant print my printer is a hp psc 2175 all in one
6helpful
1answer

Align cartridges

You could try to get out of this mode
Press & hold SETUP than press COPY OPTIONS
0helpful
2answers

Hp psc 2175 all in one SCANNER PROBLEM

This is only a software issue. Reinstall the software or try installing on other system
8helpful
3answers

Hp printer won't copy

1. turn off / on the printer
2. press setup hold down and press options
3. press start color copy

worked for me on psc 2175
Sue
Not finding what you are looking for?

279 views

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Cindy Wells

Level 3 Expert

6688 Answers

k24674

Level 3 Expert

8093 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...