Pebble 3 windows 8 driver

Make sure the primary ribbon setting in the driver is on the appropriate setting (graphics tab when accessing via Windows' "Printing preferences". Also, when checking/changing this setting via Windows, be sure your logon ID has Windows Admin rights - standard users are blocked from making driver adjustments.

The only other things I can think of, and that we've seen, is that the main logic board on these printers can begin to exhibit erratic behavior with age. The Pebble3 is a VERY old printer, and is fully out of support now by the manufacturer. If it's a failing/failed logic board, it may be time to consider a replacement.

It sounds like your ribbon setting in the printer-driver is set to the R2011 (or R2211) K ribbon. It should be set to R3011 for the full-color YMCKO ribbon. Check by locating the printer in the Windows Devices & Printers view (Win7: Start Button => Devices and Printers; WinXP: Start Button => Printers and Faxes). Locate your Pebble printer; right-click; select "Printing Preferences". Check your ribbon setting here and match to the ribbon that is loaded. NOTE that you can only make changes to this driver setting if you have Windows Admin rights with your Windows log-in ID. If you don't, have your systems administrator assist you with this by logging in with their ID.

It means you need to insert a cleaning card for cleaning cycle of printer.
Open printer properties Click on Tools tab click on Printer self cleaning button. You will get a new dialog box asking to remove ribbon and cards and insert a cleaning card in feeder.
Insert a cleaning card in feeder . Adjust thickness pointer to maximum remove ribbon and just cleck to proceed for cleaning.

May be problem with connection . You can give me your mail id and printer model I will send you driver
My id
[email protected]

Driver is available on other sites also

Just check for thickness adjustment pointer near card feeder . It should be 0.8 for standard cards.
Check in driver settings also if you have selected for manual feeding.
You may need to clean the Roller situated at feeder.

Manually delete all the files related to driver from windows/system32 folder subfolders and then restart.

Check for luminosity and contrat settings in properties/graphic/more options
If you have replaced print head enter its serial number properly.

Check if ribbon type is proper.
Do self adjustment at once.
Clean optical sensors emitting blue light just below you install ribbon in printer

Hi, did you change the ribbon type at the printer properties? You must choose the black ribbon or monochrome in old drivers.