At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
We're blocked by agreement from talking directly to viewers. We're drones... but you can submit lots of questions, videos, and images for expert to review problem and offer possible solution... sometimes very quickly depending on specifity of question asked.
I service all sorts of Goulds water pumps for a living but will need some more info to troubleshoot your problem. For starters would need to know what voltage feeds it, single or three phase, horsepower, type of controller (pressure switch, Variable Frequency Drive, Three phase across the line start etc.), what you are doing with it, pump model number, motor frame number, etc. etc.
your replacing everything but the problem part which boils down to the pump its 10 yrs old and you havent tested it either bearings or winding failing in motor
When you have a pressure switch ... its purpose is to read pressure and to allow the power to pass only when the requisite pressure has been reached.
If you have power on one side and not the other ... the switch is "open". Either there is no pressure or the switch is faulty. You could pput a gage in the place of the switch to rule out lack of pressure. Dont 'jump' the switch to make it work. If it is faulty, replace it. It is there for system protection.
×