Software S-SW70 Cant down lode the software of the cd. I got a Mac with Leopard i have the same problem! when i put the cd into my computer a blank screen appears as the installer! i also can't download my pictures with a USB "A USB device is currently drawing too much power" message appears. PLEASE HELP

How to easilydownload Pictures from Digital Camera
heatman101

It should be coming up in Itunes Movie and/or Quicktime. Sometimes it takes longer to load. Shut down computer and restart and try again.

please visit (sony-mea.com) & down lode the require soft ware

please visit this site(sony-mea.com) & you can down lode the required software

Did you install the software from the CD or did you download the driver? Are you using Snow Leopard?

If you have Snow Leopard and used the CD, you don't have the most recent drivers. Here is the link to the MP640 drivers. Remove the drivers currently on your imac and download and install from here, including the scanner driver and the MP Navigator (listed under Software).

I googled Epson support and found the answer. Here it is:
Macintosh Leopard Support Contact Support
Welcome to Macintosh OS X 10.5 Leopard support for Epson products. Here you can find out how to get drivers and other Epson software for your Epson product that work with Macintosh OS X 10.5.
Check your Epson product CD to see if it already contains Macintosh OS X 10.5 drivers. If the CD indicates support for Macintosh OS X 10.5, follow the instructions that came with your Epson product to install your drivers and other software.
If your CD does not list OS X 10.5 Leopard, follow the Step-by-Step Instructions below.
View our Macintosh OS X 10.5 Leopard FAQs.

You can find useful information on site? http://www.epson.com/cgi-bin/Store/support/SupportSnowLeopard.jsp Mac OS X Snow Leopard Support Contact Support Welcome to Mac OS X Snow Leopard v10.6 support for Epson products. Here you can find out how to get drivers and other Epson software for your Epson product that work with Mac OS X Snow Leopard v10.6.
Check your Epson product CD to see if it already contains Macintosh OS X 10.6 drivers. If the CD indicates support for Macintosh OS X 10.6, follow the instructions that came with your Epson product to install your drivers and other software.
If your Epson CD does not indicate support for OS X 10.6, DO NOT INSERT YOUR EPSON PRODUCT SOFTWARE CD IN YOUR SNOW LEOPARD COMPUTER. Follow the step-by-step instructions below to obtain the latest software and utilities for your Epson product as they may be needed for this new operating system.
Good Luck.

which version of mac you have now ?

As per someone elses post here:
# Select Print from the File menu.

If you see the message The Epson Printer Driver dealing with CD printing is not installed, click OK.

# Click Tray, select Tray 2, then click OK.

Note: If Tray 2 is not selected, the CD design will print in the wrong position.

# Click Manual Print.

# Make sure Epson Stylus Photo R(your model) is selected.

# Under Paper, select the following settings:

* Source: Manual

* Size: A4

# Click Properties.

# Select CD/DVD or CD/DVD Premium Surface for the Media Type setting.

# Click OK, then click OK again to print. 

I am assuming this is the G3010 HP Scanner. If it's not please clarify.

If this is the G3010 Scanner, if you don't find the MAC drivers on the CD, then visit this site at HP, in Safari and download to your MAC, begin the installation.

Is there an error? Does the CD/DVD indicate the MAC drivers are on the disc? Do you have another CD/DVD that indicates the MAC drivers exist on it?