Samsung washer noise - Samsung B1245 Front Load Washer

A washer making a loud noise during spin cycle can also be caused by a faulty drive pulley. The pulley is what the belt (if applicable to your washer) rides on to spin your washers tub. The pulley can be made of plastic or metal. It could be simply worn out or just loose.Jul 27, 2015

Probably the spider arm or a bearing. Probably time for a new washer

The washer tub has dampers to absorb this spin cycle vibration, your machine must have some broken dampers for the tub.

on many machines that is normal, the shaking continues until the load is distributed relative evenly around the spinning drum. It is also possible it is the main bearing but I am not sure. The noise I am talking about would have been there since new. These links may help. Washer has noise during spin cycle Whirlpool Maytag Sears GHW9100LW1 Washer is Making Loud Noise
How To Fix Washing Machine Making Noise During The Spin Cycle
http://www.partselect.com/Repair/Washer/Noisy/

sound as rear bearing. have you used soap for front load washer?

Sounds a lot like a bad rear bearing. I replace them all the time

Hi,

First check that the "shipping" bolts have been removed...

When my washer did that, I found that the shocks that hold the tub were bad...

Check out this tip I wrote about the noise and vibration that front load washers can make..

Washer Problems Washer noise when spinning

heatman101

Mine did that and had to have the washer re-balanced.

I have had a repair guy out for a separate issue and been told my knocking noise most prominent during rinse and spin is the bearings going. I have a samsung WDJ1225c front loader

CHECK THE TUBS AND MAKE SURE YOU HAVE NOTHING THAT FELL OUT OF A POCKET ALSO CHECK BETWEEN THE BOOT AND TUBS.OTHERWISE CALL FOR SERVICE THATS WHAT WARRENTYS ARE FOR! GOOD LUCK!

If you need further help, I’m available over the phone at https://www.6ya.com/expert/dude_653d05454b389bba