Canon ir3030 ng #853 in print job log. No Output pages.

Reload the printer driver on the laptop.

#853
Cause
-Using the wrong printer driver.
-The machine does not have the proper printer kit installed (e.g.
UFR, PCL, PS kit(s)).
-The print job did not print because due to lack of
resources on the printer (e.g. memory, HD space, etc).
-Print spooler on the machine is full.
-The number of secure print jobs have exceeded the
maximum limit that can be reserved at this time.

Remedy
-Make sure that the printer driver that you're using is the correct
one for the operating system on the computer that you are
printing from and specific to the printer model that you're printing
to.
-Check and verify that the correct and the required printer kit is
Installed (e.g. UFR, PCL, PS kit(s)).
-Reduce the number of pages to print.
-Erase unnecessary jobs that are stuck or in reserve.
-Turn off spooler on the printer, ADDITIONAL FUNCTION >
SYSTEM SETTINGS > NETWORK SETTINGS > USER
SPOOLER, set this value to OFF.
-Print out or erase secured print jobs that are stored or waiting to
be printed on the machine.

Canceled all the print jobs that are queued up. Unplug/ replug USB/Ethernet- the driver should re-initialize.

there was no code after NG.The print command is working from the pc but the canon machine ir3225 on the log list it shows the job no and all but in the result section it shows NG without any code.This Makes me headache ,please can any one solve this

Hi,
first try to download new driver from http://software.canon-europe.com/,

then install everything from begining.

Did you try with PS drivers?Are anybodie else have this problems?Check the driver versions on other users and properties.

On official canon software download page you willl find win7 patch and drivers.

you must change the port of the printer,to usb port and not for network port.

http://www.usa.canon.com/opd/controller?act=OPDDisclaimerAct&fcategoryid=2281&modelid=12301&id=57901&file=/cpr/software/imagerunner/PCL5e-c_v8.55_Win2k-Vista_INF.exe
Try this for Vista 32 bit operating system printer driver.

I had a similar problem with my MF6540. I could access the remote UI and see that the printer was recieving information via the print log. It would list all of my test pages that I tried to print but in the print results column I would get an error code NG(##5536) and the printer would not actually print anything. I tried the UFRII driver stated above and everything seems to be working now.