Digital jukebox firmware hd001 - Dell DJ MP3 Player

http://www.microsoft.com/windows/windowsmedia/player/11/readme.aspx#IssuesupdatingfirmwareonCreativeportabledevices

See this link.

Try unistalling Windows Media Player 11 from PC. and then upgrade ur device.

Follow necessary steps.

Had the same problem and nearly went nuts trying to fix it. Here's what I did:

1. Uninstall all creative driver & creative software.
2. Uninstalled Windows Media Player 11 (Rolled back to WMP 10) and restarted PC.
3. Uninstalled Windows Media Player 11 Runtime and restarted PC.
4. Downloaded and Installed the latest free version of Winamp from http://www.winamp.com
5. Connected my A/C Power Cord to my Nomad Jukebox then connected my Nomad Jukebox via USB cable to the Computer.

The computer should then recognize the Nomad Jukebox as "Found New Hardware" then "MTP Device" and lastly "Your new hardware is installed and ready to use.

6. If you haven't already, go to the creative website and download the Creative Zen Xtra PlaysForSure Firmware 2.10.03 and save it to your computer.
7. Run the Firmware (Make sure Nomad Jukebox is connected) and at this point the Computer should recognize the Nomad Jukebox and begin the upgrade.

After your upgrade is complete, You can go ahead and re-download Windows Media Player 11 and it will recognize the Nomad Jukebox.Not sure what version of windows you have, but I have two computers, one with windows xp and the other has windows 7 and Im able to transfer music perfectly fine with Windows Media Player and RealPlayer on both computers. I hope this works for you. Good Luck!

Follow the link below and you will find all the software.
Drivers and Firmware
http://support.creative.com/Products/ProductDetails.aspx?catID=213&subCatID=216&prodID=241&prodName=Creative NOMAD JukeBox&subCatName=Digital MP3 Player&CatName=MP3+Players

It appears that my Creative Nomad Jukebox is stuck in the Rescue mode. It displays the four options suchn as. 1.Clean up 2. Format all 3. REload OS 4. Reboot

It is not recognised on the computer either.

Steve

Firmware Problem

I have Creative Nomad Jukebox Zen Xtra 60GB.
I changed harddisc. "firmware problem"

Please help me.

Ok this is what I have found.....Try to run the Recovery Mode here is a link to Creative Labs website that will walk you through it... Just look for Jukebox its on the bottom...you can get the firmware from the same website under support and then just select the type of jukebox you have....that will be the second link...You will need to click on Zen and then look on the right side for Archived Products
http://support.creative.com/kb/ShowArticle.aspx?url=http://203.211.142.197:80/srvs/cgi-bin/webcgi.exe/,/?st=357,e=0000000000342903798,k=6058,sxi=1,varset=ws:http://us.creative.com,case=4794

http://support.creative.com/Products/product_list.aspx?catID=213&CatName=MP3+Players#

Good Luck and let me know if this helped

cbinny1

Creative Jukebox 3

1. Remove the battery cover
2. Partially remove the battery
3. Press and hold STOP button
4. Slide the battery back into position - the unit should power on.
5. When the CREATIVE logo appears on the display, release the STOP button then immediately press and release the PLAY button.
6. The following options will appear on the display:

• Clean Up (Performs a disk scan on the players hard disk)
• Format All (Formats the players hard disk - Note: all contents will be lost)
• Reload Firmware (Reloads the Operating System on the Jukebox. Note: Reloading your OS, will not effect the contents of the files stored on your Jukebox Zen. Select this option ONLY if you have access to a PC and you have downloaded the necessary firmware to install.)
• Reboot (Reboots the device).

download in here, i fixed for my elio
http://rapidshare.com/files/27026177/Baladeur_ELIO.rar.html

means the software used to operate the unit is corrupt and you need to download and install a new version
http://us.creative.com/support/downloads/