If you set current time in clock set, it will not asked you again. I think you just cancel it when clock set display appears.
when clock screen comes, select date format like D/M/Y or M/D/Y etc then go to date setup, set current date then set time and at end you will reach OK button, press OK and job is done. There is no way to press cancel button in this sequence.
When you press cancel button that means you are not setting date/time and camera will show this screen again when you power it up.
Yes,
When Lithium Rechargeable Battery got defective or dead then camera will not hold time and date settings.
Qualified camera tech will replace that battery as it is mounted on flexible board under top jog dial portion.
×
274 views
Usually answered in minutes!
ive tried to set the clock and hit ok and cancel and turn the camera off and when i turn the camera back on the screen is clock setting again like i never even set it.
your right i set the date format and time and my only option is to hit ok next. then i can proceed to use the camera. question is after i shut off the camera and turn it back on to use it again the first thing that pops up is clock setting again. i can set the date/time hit ok then turn camera off then back on again and the clock setting is back up like i never even set the time. is there a way that i can hold the setting so im not setting the time/date every time i turn the camera on?
i replaced the battery and still i have to set clock setting every time i turn the camera on.
×