Paper got stuck in Konica Milolta magicolor 2400w

I had the same with my canon printer last year. But you have to be patient enough to Try cleaning the ink using a damp cloth on the feeder roller and transfer belt. Make sure the inside of the printer is clean and does not have any ink spilled on its parts. It will take a while until you get all the dust and fluff out! Also, try taking out the printer cartridge and then back on. Then try printing a test page: Select PRINT TEST PAGE and press the Menu Select key.
If that doesn't help, you may refer to your printer troubleshooting manual or check this link for further details: https://www.manualslib.com/manual/805991/Konica-Minolta-Magicolor-2400w.html?page=158#manual

Is it got ink? is it got paper? is it getting the info from pc? is it got a paper jam? is it the operator?

IT is 16year old today, and there are no spare parts, for it.
cept used on ebay.
the blinking lights in the manual mean, toner cartridge dead or fake one installed. on page 11.
if got it to work there are no windows 10 drivers, now. XP yes.

see that page 11 states on errors.
https://www.manualslib.com/manual/90066/Konica-Minolta-Magicolor-2400w.html?page=11#manual


the service manual is here,

https://www.manualslib.com/manual/805991/Konica-Minolta-Magicolor-2400w.html


RTM?

I have a Magicolor 2400w and had the same problem... I hope I'm not to late because I almost put mine in the trash.

How I fixed the problem was I adjusted the solenoid behind the fan on the right side. I made a video and posted is on YouTube. Search YouTube for Magicolor 2400w paper size error. or follow the link.

http://www.youtube.com/watch?v=jlyuPJW6RjU


Hope this helps

yes there is a way, but if you do it yourself there are more chances that you will break it.so dont try it yourself.call concerning technical service rep.

It`s possible you`re using too heavy paper, same problem´s with thin sheet´s?

Try to pull it down, from the inside of the machine. If it is not taken out in one piece, you need to call a tech.

Start the Konica Minolta Status application and check the error, you should get more info there.

Reset your Toners and Imaging units for Bizhub and CF series.
http://www.chipreset.eu

Print a test page, then when it jams, notice if the paper made it's way in to fuser (toward the back of the unit. If it got that far, your fuser may be bad.

Let me know.

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

I've had that problem before too, and found out that there were copies of the printer that had somehow installed themselves on my computer. All I needed to do was to choose to print with "konica minolta copy 1" instead of the one that I *thought* was installed and it worked. I then deleted the original printer and just stuck with the copy.