G400 welder no control

If people could just learn to GOOGLE their questions...

Honda G400 Type VIN G400 1000001 1096409 Small Engine Parts

This is on the same website, it's for serial number G400-1200001-1519048, Honda calls it G400K1
(sorry, Fixya doesn't give me the option to set this as a link)
Either search on that website for Honda G400K1 or drop the following into your address bar.

http://www.ereplacementparts.com/honda-g400k1-type-qb6vin-g40012000011519048-small-engine-parts-c-37657_37658_37986_37705.html

Clarke Mig Welder 6 Position Heat Selector Switch Parts

I found a heat selector switch, but I don't know if that's what you need. You can do web search for ' heat selector switches' or' mig welder switches'.....

The capacitor(s) may be open. or resistor has failed. It is also possible heat selector is fused to the one setting.

Which model?

Lincoln does ahve the diagrams in the manuals available here:
Operators Manuals ' Lincoln Electric

there should be a switch to go from panel or remote control. and 2 kiinds of foot control 1 just on or off 2 on off with the amps control

You can try :-

http://ca.konicaminolta.com/products/consumer/digital_camera/dimage/dimage-g400/index.html

Then either download the manuals you require or contact their support team.

I have the same problem with the Mighty Mig...Did you find these resistor values?

driver here:
http://download.cnet.com/Compaq-Matrox-Millennium-G400-Video-Driver/3000-2108_4-12724.html

Please download required user manual of G400 camera and print it.

My wife and I have the same problem. I have temporary resolve that problem by lowering the dimmer to its lowest level (hard to see the dash board) but the alarm and noise are gone! supposedly its the passenger door switch (have not replace it)

MCH