I turn on the TV and the timer light is the only light that will come on
After a few seconds the timer light will turned off.
Okay I have the same problem with the timer light coming on and then shutting off within a few seconds. I have sound but no picture. I tried holding the menu and input together and it did what you said...green timer light blinked a few times. But now what? That didn't seem to fix it. Mine is a Mitsubishi HD 1080
After holding down the menu and device the led will blink a two digit error code such as 3 blinks pause then 4 blinks then repeat that sequence a couple of times. Need that blink code to help let you know whats going on. The 34 code means lamp abnormality which translates to the power Pwb capacitors have most likely failed.
SOURCE: have a mitsubishi hdtv 1080
no i havent fixed it. i couldnt get help from your so called experts because i dont have a credit card to pay you so i will keep trying to get help from someone whos really willing to help .
SOURCE: Need a "Mitsubishi HD-1080 HDTV Receiver" to convert my TV to HD
if you are still looking for this i have 5 of them left , brand new, hit me up and can list them for you on ebay.
SOURCE: my tv won't turn on, the timer keeps flashing
http://www.jyerdon.com/tv/
If it`s a 65513 mitsu, this will fix the flashing green light, most of the time, e-mail me with any questions, good luck
[email protected]
SOURCE: Mitsubishi Model # WS 65311 HD 1080 turns on then shuts off.
try holding in the menu and input/device buttons on the front of the set both together and see if it blinks a series of blinks, pause briefly then blinks a second series of blinks, let me know what the blinks were sush as 22 or 24
SOURCE: when I push the power button the timer light glows
A fuse is blown inside usually and its going into shutdown. If its f9a04 or f9a05 then its likely convergence (the most common issue). Check them with an ohm meter. Here is a tech guide, it talks more about when the tv will still come on, but it may be helpful.
http://www.fixya.com/support/r5001731-convergence_diagnosing_convergence
Let me know if I can be of further assistance.
Testimonial: "This is great! I will go to Radio Shack tomorrow and pick up the fuses and try this out. I am so hopeful this fixes the problem. Thank you so much electronick!!!"
1,246 views
Usually answered in minutes!
Okay after the menu and input pushed together it blinked the #24.
What should I do next.
What about a 24 code?
×