...3 hours it turns off. In stand-by the tv blinks 9 red times. Do you have any suggestions? (I know that if it's an optical block the part will be replaced for free by Sony because of the class action) ...
sony wega kdsr50xbr1 blinks red 3 times Lamp door is not secure or lamp interlock switch was damaged during lamp replacement. Your lamp or door is not secure.
KDSR50XBR1 won't stay on standby light blinks 18times then flashes on and off (screen) red light blinks 5 times. I unplugged and plugged back in and now I cannot get a picture at all. Any advice? ...
Sony 60" wega kdsr50xbr1 blinks red 4 times We turn it on picture comes on for a sec and it shuts off then blinks 4 times red. Lamp has been replaced ~ any thoughts? Please check Fans are running in ...
Question about KDSR50XBR1 50" Projection HDTV
I have a sony kdsr50xbr1 screen turns off after 15 min, there is still sound but the screen is essentially blank. Sometimes there are bars on the side of the screen for a second. The the status light ...
my sony kdsr50xbr1 turns on but then goes my sony KDS-R50XBR1 turns on but then goes immediately to a red flashng light and blinks 4 x give it to ur nearest sony showroom for service
Question about KDSR50XBR1 50" Projection HDTV
im getting a 4 blinking red light code when i turn on the unit. happens intermittently. Mine is doing the same,with power off, on your remote press: display 5 volume - power the diagnostic screen ...
...code of 3 blinks inidicate that the door covering the lamp is not secure oer the lamp is not secure. Make sure the lamp door is seculy screwed down. ussally the door push a little switch closed. If ...
...code description for this with a possible fix? For the KDSR50XBR1, 2 blinks, pause, 2 blinks, etc. means "Temp (temperature) error" and the probable cause location listed is as follows: - Set ...
Red light blinks 6 times Failing power supply
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions