CPU fan inoperable on HP Motherboard MCP61PM-HM

Substituting in other working components will be the only way to confirm the motherboard is not working. You may find that the motherboard or the CPU has died. Without more information about your system, it is difficult to provide more help.

http://mxdtr.com/hp-compaq-motherboard-mcp61pm-hm-driver-drivers/

Computer does not boot up The problem maybe the RAM, it is faulty or just needs reseating to make proper electrical contact.
Reseat the RAM and then boot up your laptop. If it still does not boot up then remove the RAM module/s and take them to your friendly computer repair shop and get them to test the RAM for you. Just like you sometimes need a mechanic to repair your car, sometimes you do need a technician to diagnose and identify the fault or faults on your computer. Not only does a good service technican have the experience to deal with this type of problem, they also have the equipment that allows them to look at things the average computer user can't see, and he has a collection of replacement parts that can be used to quickly test individual components on your computer.

There is a brief manual at HP website: HP Support Document
If you need PINs specification try here: FixYa - HP MCP61PM-HM motherboard diagram
Else you'll have to try contact ECS (board manufacturer) and ask them for the manual: ECS Web Site

The ECS MCP61PM-HM motherboard otherwise known as the HP Nettle GL8E motherboard,

http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c00906137

The ECS MCP61PM-HM motherboard otherwise known as the HP Nettle2 GL8E motherboard,

http://www.algogo.com/store/products/ECS-HP-MCP61PM%252dHM-Nettle2%252dGL8E-6150SE-AM2-Motherboard.html

The ECS MCP61PM-HM motherboard otherwise known as the HP Nettle3 GL8E motherboard,

http://www.amazon.com/ECS-MCP61PM-HM-Nettle3-GL8E-6150SE-Motherboard/dp/B0045X6N1S



Which one is it?

Seems like the 2.2 is a new version. It supports a

Phenom with Quad Core technology (AM2+) up to 9600 (up to 95 watt)

The link below has the specs of your original MOBO...

http://www.softunique.com/ECS-MCP61PM-HM-Nettle3-GL8E-Motherboard-HP-ver-22-MCP61PM-HM-V22.htm
Here are the 1.0B specs:

MCP61PM-HM REV:1.0B SOCKET AM2 MOTHERBOARD

Motherboard description Motherboard manufacturer's name: ECS MCP61PM-HM
HP/Compaq name: Nettle-GL8E

CPU/Processor Socket: AM2
Supports the following processors:
Athlon 64 X2 with Dual Core technology up to 5600+ (up to 89 watt)
Athlon 64 less than 4000+
Sempron less than 4000+

Front-side bus (FSB) 2000MT/s (2.0 GT/s)

Chipset NVIDIA GeForce 6150SE nForce 430

BIOS features System BIOS core brand: Award
Keyboard combination to used to enter BIOS: F10

Form factor Micro-ATX: 9.6 in X 9.6 in

Memory Dual channel memory architecture
Four 240-pin DDR2 DIMM sockets
Supports PC-4200 (533 MHz), PC2-5300 (667 MHz), and PC-6400 (800 MHz) DDR2 DIMMs
Non-ECC memory only, unbuffered
supports 2GB DDR2 DIMMs
Supports up to 8 GB on 64 bit PCs
Supports up to 4 GB* on 32 bit PCs

Click on this link or copy and paste the complete link into your browser.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response

Thanks, Joe


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

MOTHERBOARD DESCRIPTION
Motherboard manufacturer's name: ECS MCP61PM-HM
HP/Compaq name: Nettle3 GL8E

| | |
| | |
***************
+5v Out Ground

The one all by its self is the 5 volt
the one in the middle is SPDIF Out
the one next to this is ground

Hi RobPu,
I have searched everywhere. I even entered a chat windows with Compaq & asked for a site to download the manual for Compaq Presario SR5015LA Desktop PC which has the motherboard MCP61PM-HM in it. (Nothing). This board was made by
ECS known as EliteGroup. Still nothing. Forms for the most part do not help, only with drivers. Drivers for the board can be found on Compaq's web site.
http://h10025.www1.hp.com/ewfrf/wc/prodinfoCategory?lc=en&cc=us&dlc=en&product=3411762
But the manual will not download. That's what is needed to hook up the front panel pins to you're case. I even looked for other possible boards who's layout was close to the MCP61PM-HM.
Nothing! I did find other Compaq PC's that also had the same board in it but after looking through the manuals, not one actuallys shows where to plug the front panel LED's on to the board. Why? Because Compaq does not support a user changing out their case for another. There is no money in that.
For the most part RobPu, system boards share some things in common. I am posting a picture for you. This pic is upside down for you so try & work with me here. Hook up you're LED's as shown. This should work for you. Pin 1 is you're starting point.
This is standard for ECS boards even if it's being sold by Compaq. Like I mentioned, for you it is posted unside down.
Try it, I'm sure it will work for you.

Enjoy!
If I can help you further, feel free to post.
Suggestions & comments welcomed.
Mike