I have an Optoma Theme Scene HD81 home cinema projector. It has a separate video box that acts as the control and power unit for the projector. The on / standby button on the video box only flashes, it does not stay on, indicating it is always in standby mode. Does anyone know how to power up the box and project? Regards Paul
SOURCE: Optoma EP755 new lamp when power standby button
you need to reset the lamp timer, usually done by holding some buttons while turning on
SOURCE: Flashing standby,power on,lamp lights with no fan
Most problems with the lamps are covered in the manuels for these projectors , however none user technical difficulties are not .. ie where it is needed to open the unit not recomended to the untrained as a screwdiver in the wrong place can cause irepairable harm let alone death ?
To check if it is your bulb simply take the unit to an engineer for an estimate usually free at least you will know whats wrong and can go from there .. and if you do have a working bulb an ebay replacement is probably the cheaper conclusion to your problem ... regards Vortash
SOURCE: PROJECTOR PROBLEM Casio XJ 31
it wasn't able to go through cooldown mode. turn it on, power down and let it go through cooldown. does the light come on at all?
SOURCE: Projector problems
Hello!
After 2 years I finnaly solved the problem. There was a flaw in the
lamp´s temperature circuit. A technician disassambled my BENQ PB8253
unit and fixed the problem. Charged me US$ 75.00. I´m in Brazil.
Hope this can help.
532 views
Usually answered in minutes!
×