HOW TO RESET LEXMARK N400E - Lexmark N4000e Print Server

this might help
https://www.techwalla.com/articles/how-to-reset-a-toner-chip-for-a-lexmark

SILTAMIRDU, Your message does not qualify as a question or query for a problem, try somewhere else
DO NOT MAKE THIS SITE WITH YOUR GARBAGE
Take your GARBAGE to another Side
Your message qualifies as SPAM

When a Lexmark cartridge is refilled, it will not be able to report its ink level.
Please note that all Lexmark printers work best when original supplies or genuine Lexmark cartridges are used. We do not recommend the use of third party, refilled or remanufactured cartridges - you might not get the print quality you expect from ink that is specially formulated by Lexmark.

Here's the link on how to replace the Photodeveloper Cartridge on the Lexmark X500/X502: http://bit.ly/bzQQtH.

Here's the link on how to reset the photodeveloper (OPC) count on the X500/X502: http://bit.ly/9BxHqz.

Hope this helps.

Hi there

Lexmark and Brother printers, dont have any thing I know of to reset the inks when you refill them your-self sorry.
Pineworks

how do you reset the transfer belt of a Lexmark C522 colourlaserjet.

Thanks
Alex

to [email protected]

1. Turn off the printer. 2. Press and hold (check) and .(right arrow). 3. Turn on the printer. 4. Release the buttons when Performing Self Test displays. The message CONFIG MENU displays on the top line of the operator panel. 5. Select Reset Maintenance Count from the Configuration menu. 6. The message Reset Maint Cnt=Reset displays momentarily. Press (check) to reset. When the reset operation is complete, the menu returns to the Printer Setup Reset Maintenance Count Screen. Scroll down to the Exit Configuration Menu and Press Select to Return to Ready status.

Fiend your solution direct from Lexmark. Here is your solution



http://www.lexmark.com/printer/prob676ijt65/solution
921

It should be under Utilities menu -> Reset Photoconductor Counter.