How to remove all previous direction searches from navman 320

If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Pull up older posts. Surf the site with patience. Do a search by type in the brand name of your device at its search box and press "Enter".
http://electronicshelponline.blogspot.com/

I've got MY65T working on an iPhone 3GS. I previously had the problem where it would pair and retrieve phone book, but not transmit or receive voice from my iPhone when making a call.

The last thing I did that fixed it was to remove the bluetooth pairings and "reinstall software on your navman". I don't know if this may remove some of your settings / POI / etc. This was a new purchase so I didn't have anything to lose.

Before doing this I had upgraded the navdesk software to 7.30, and installed the latest firmware for MY65T. Firmware is located at http://www.navmansupport.com.au/Software/My%20Series/MY65T/MY250___352.htm

Details:
-remove the phone bluetooth pairing from the Navman from Settings / Bluetooth / My Paired Devices / [your phone] / delete
-remove the bluetooth pairing from your phone's settings
-connect navman to PC and launch navdesk
-click "My Navman" / "Reinstall software on your Navman"
-download the install file if prompted
-accept the reinstallation prompts and complete reinstallation
-set your phone to discoverable over bluetooth (just keep it on the Bluetooth settings screen on iPhone)
-go to Settings / Bluetooth /" Search new devices" on your Navman
-click your phone's name on the navman's discovered devices
-enter the PIN onto your phone when prompted and accept the pairing. This takes a little while.
-test handsfree!

a few things to ensure

1) battery is fully charged
2) Thed correct BAUD rate and PORT are set ( see manual)
3) You are oiutside and there is a clear view of the sky.

Still failing? Then possible damaged SIIRF chip caused by starting engine while plugged into power socket

Please rate my help++++Thanks for using FIXYA

HAVE YOU TRIED WWW.GARMIN.COM FOR YOUR MODEL? IF LISTED CONNECT WITH MINI USB LEAD AND FOLLOW INTRUCTIONS

i get the same on two of the same here only thing i can say is their tech support does not work and their customer service is next to none but perhaps they have turned off the satelite signal so that the 320's wont work anymore so that people have to go out and buy another 1 or perhaps the aliens shot down the satelite

This manual is available as a free PDF download from the following link.

http://www.navman.com/Documents/InCar/EN/User_Manuals/iCN_series/iCN300_series/Navman_Manual_iCN320_EN.pdf

how do i reset my navman icn 320

I have a ICN 320 Navman and it took 20 to 30 mins to connect to Satalites that is untill yesterday morning when I Updated the Navman Satalite GPS Data if U wish to know what I did please contact me on [email protected]
My ICN 320 now takes a few seconds to conect to Satalite systems/
Regards
Ken

I have a 310 and purchased an SD card for France from Navman, it says it works in the 310/320/330 so my guess is that a 320 map will work in a 330.

carefully pull off front grey cover with your thumb, next to card socket, underneath are 4 security screws you need a small torque head screwdriver, take off cover losen security screws inside around battery, unplug and remove battery, replace in reverse.