Needm location of reset buuton on HP C6180 All-in-One printer

You can do a reset on your printer.Unplug the power cord of the printer.Press and hold the # and 6 buttons together and then plug the power cord back into the outlet.Keep holding the 2 buttons until the display goes blank or RESET is displayed.If the printer automatically turns off, turn on the printer.The printer should start up and you will be able to select language code.

This seems to works for me and doesn't appear on the HP support site nor in the manual...

1. Power down the printer (use on/off button) and remove power cable. Wait 2 minutes.
2. Hold down Help and OK buttons together while plugging in the power cable.
3. I held the buttons for around 5 seconds and when I released them, the printer seemed to go back to a hard reset - all sorted!

Hope this helps!

R

just reset the printer

unplug the power cable without turning off the printer
press and hold # & 9 Button
while holding down pluggin the Power cable and it will reset the printer (everything)

**** U will lose everything that has been saved in the printer settings

The Formatter board (main logic board) is faulty. You need to take the printer in for repairs to HP, in my experience though it usually works out better to replace the printer.

Press 6 and # while disconnecting the power cord (wait a little bit) and connecting it again. When the display is turned on again you can release the buttons.

After this reset you need to enter language, location and any wireless settings etc.

C6180 reset:

Perform a semi-full reset to set all user menu settings, telephony parameter settings, country/region and language UI, fax memory settings, fax journal information, speed dial and broadcast lists, personal header information, and junk fax settings to the default settings. Performing a semi-full reset of the All-in-One

1. Use the On button to turn on the product.
2. Remove the power cord from the product.
3. Press and hold the # and 6 buttons.
4. While holding the buttons down, connect the power cord to the product.
5. Continue to hold the buttons down until the color graphics display becomes blank, then release the buttons.
6. Use the On button to turn on the product. The reset information appears on the color graphics display.

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01457329&cc=us&lc=en&dlc=en&product=1153494

Or a Full reset:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00720248&cc=us&lc=en&dlc=en&product=1153494



If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

try resetting the printer using the # and the number 6 buttons,holding them down and then inserting the power cord at the back of the printer.
see if it works.
In case it doesnt you can always contact a free online technical
support with an online live techbuddies technician at
http://tinyurl.com/m7ghqz

Hello,

Try unplugging the printer from power for about 10 minutes and then reconnect it and see if that will reset it. You mentioned the error code 83c00020 is that on the printer screen or somewhere else?
I wasn't able to find that exact error is that the way the error actually displayed?

Reply back and let me know. Hope this helps. Please remember to rate this information.

Thanks

it would be best to call HP TOTAL CARE. they would know how to reset it.

Resetting the All-in-One

• Press the On () button to turn off the unit.
• Disconnect the power cord from the back of the unit.
• Connect the power cord to the back of the unit.
• Press the On () button to turn on the unit.