I have changed my password on my router and now my lexmark x6650 will not connect wireless

This could be a firewall issue. Make sure to allow full access to all Lexmark software and printer communication processes in the program rules/permissions for your firewall.

Also, place your printer where it receives excellent wireless signal quality and away from other electronic devices which can cause wireless interferences (e.g. cordless phones, microwave ovens, baby monitors, garage door openers, and other wireless electronics).

The "pin" number is actually the Wireless security. It comes from the router. If you're using WEP encryption, it's a 10 or 26 hexidecimal code (0-9 A-F) that is not case sensitive. If you're using WPA, then it can be any 8-64 character password that is case sensitive. Whoever set up your routner will have the code, or if it's WEP you can usually read it by logging into the router. If it's WPA, you'll have to generate a new code...at least that's the case in Netgear and Linksys routers.
]
Carl

The password asked for is not for the lexmark, but you should enter the security code for your wireless router in order to use this to connect to the printer.

You can download the Lexmark X6650 driver from the Lexmark website for free. Click on this link Lexmark X6650 Drivers. Select your operating system by clicking on change OS.


Then click on FILTER.


Click on the Complete Driver under Recommended Downloads. Download, execute the file and follow the instructions on the software. Hope this helps. Thanks.

To scan from Lexmark X6650 you need to install drivers and scanner software
You can download the drivers for Lexmark X6650 from Lexmark Official Product Support for X6650
Select the Operating System (OS) to proceed.

CreativeTECH

You can download the drivers for Lexmark X6650 from Lexmark Official Product Support for X6650
Select the Operating System (OS) to proceed.

CreativeTECH

Hello, get it downloaded at : www.nodevice.com/driver/company/Lexmark/Printer.html
www.lexmark.com/
www.driverslab.com/drivers/Printer/Lexmark/9/63.html

Regards

Hi,
Visit to the given link for manual...
http://www.retrevo.com/support/Lexmark-X6650-Multifunction-Printers-manual/id/22273ci877/t/2/
hope this has helped you.. Thanks...

Its very simple the Ip addresses changed. check the ip address of the machine, could be the Dhcp was on and it change the ip address so no longer u can print.

I’m happy to help further over the phone at https://www.6ya.com/expert/mustafa_06f84c65ab5cc745