Top 20
General Electric Stove/Oven/Range Chrome Timer Knob Set - WB3X459 Questions & Answers
Why electric over comes on by itself?
One of the answer is here
https://www.google.ca/search?q=electric+over+comes+on+by+itself&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a&channel=sb&gfe_rd=cr&ei=Pv9mVMzjM-GV8Qf7wIGoBQ
I can't get my clock set on my GE stove model #
To Set the ClockThe clock must be set to the correct timeof day for the automatic oven timing functionsto work properly,The time of day cannot bechanged during a delayed cooking or a delayedself-cleaning cycle,
1. Touch the Clock pad twice.For models without a Clock pad:Hold the + and - pads for 3 seconds.
2. Touch the + or - pads.If the + or - pads are not touched within oneminute after Step 1, the display reverts to theoriginal setting. If this happens, repeat Step 1and reenter the time of day.
3. Touch the Start/On pad until the time ofday shows in the display. This enters thetime and starts the clock.To check the time of day when the display isshowing other information, simply touch theClock pad. The time of day shows until anotherpad is touched.
http://www.managemylife.com/mmh/owner_manuals/138431/GE-Free-Standing-Electric-1112529L
The knob has nothing to do with question i asked i need to size size of wire for power
1) Copy following link for live answer Dec 2012 to figure correct wire size
http://waterheatertimer.org/Color-codewire.html2) Fixya posts 'recommended' answers based on computer guessing what you asked. Look for date on each answer.Recommended answers can be totally unrelated, but sometimes they are spot on. These answers were posted by experts over previous years, and now fixya owns the work done by others and uses that work to answer questions that live expert does not answer.3) This particular Question was posted under 'Chrome timer knob set,' and somehow ended up among timer questions. Each expert answers questions by expertise such as timer, water heater, electric wiring etc. Often the questions do nor show a product or clearly state what answer is needed. People do not always know what they are asking for. That's why fixya is here: to help sort out possible answers.So the expert sometimes guesses at answer, or the computer guesses which recommended answers to post.4) Add a comment for live follow-up, Dec 2012 If you need further help, I’m available over the phone at
https://www.6ya.com/expert/gene_9f0ef4df2f9897e7
Lower element in oven will not come on I replaced
You need a multimeter to do some fault-finding. Also, check for a (usually hidden) square ceramic fuse mounted inside the thermal insulation of some ovens. They go open circuit with age.
The multimeter is used to perform fault-finding on the oven's controls, (inc the fuses) to determine voltage presence. Sometimes the fuse holders themselves corrode internally, causing problems.
How come the broiler is working and the oven is
When you select oven setting do the oven element and the broiler come on at the same time? If they do and the oven is not working the oven element is probably blown or there is burnt wiring at the element terminals.
My ge stove is dead. control panel is out,
The circuit breaker probably tripped. Usually it will be a 2 pole 40 or 50 amp breaker. Turn it all the way OFF, then back ON. Sometimes it's not easy to visually tell if a breaker has tripped, so do it anyway. If that doen't solve the problem post back please.
Oven beeps and displays F2 or F3?
Hello there:
this error code is telling you that the oven temperature sensor is going haywire and needs to e replaced
Here is the 2 error codes and what they mean and what needs to be checked
F2
Oven temp
exceeds 590 w/ unlocked door
High resistance
or interference in oven temperature sensor. Replace oven
temperature sensor
F3
Open oven
temperature sensor circuit
Replace oven
temperature sensor
Timer keeps going off
push in timmer knob turn till its at 12 o clock if it does not shut off then the timmer is bad ..you can dissconnect timmer from the back ..turn off breaker or unplugg. dissconnect wires from timmer .. tape connectors real good .now no annoying buzz
The oven and the left
First, you need to provide the model number of the stove. Second, have you checked to make sure you have power on both legs of the 220V feed to the stove?
I have a GE slide in stove/oven that is showing a
Hi
Thanks for using FixYa. F1 error indicates that the control board (ERC) has gone bad and the electronic range control (ERC) should be replaced to resolve the issue. Please do rate the solution if the issue is resolved or post a comment for further assistance.
Thanks
Rylee
Not finding what you are looking for?