General Electric Stove/Oven/Range Chrome Timer Knob Set - WB3X459 - Answered Questions & Fixed issues

check repair clinic.com for a new thermostat sensor. Appliance Parts Lawn Mower Parts Heating Cooling Parts 365 day returns

Sounds like you bent the door where the lock is. You might have to replace the door.

timer on what ? make, model and age of unit might be useful in forming a coherent response.

One of the answer is here https://www.google.ca/search?q=electric+over+comes+on+by+itself&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a&channel=sb&gfe_rd=cr&ei=Pv9mVMzjM-GV8Qf7wIGoBQ

If the light remains on, that would indicate the circuit was damaged. The light goes on when the circuit is complete. This usually happens when the burner gets hot. If it caught fire, then the stove is registering it as hot all the time. Elisa Jed ' http://www.atlasappliances.com/en/pg-kitchen-appliances

To Set the ClockThe clock must be set to the correct timeof day for the automatic oven timing functionsto work properly,The time of day cannot bechanged during a delayed cooking or a delayedself-cleaning cycle,1. Touch the Clock pad twice.For models without a Clock pad:Hold the + and - pads for 3 seconds.2. Touch the + or - pads.If the + or - pads are not touched within oneminute after Step 1, the display reverts to theoriginal setting. If this happens, repeat Step 1and reenter the time of day.3. Touch the Start/On pad until the time ofday shows in the display. This enters thetime and starts the clock.To check the time of day when the display isshowing other information, simply touch theClock pad. The time of day shows until anotherpad is touched.http://www.managemylife.com/mmh/owner_manuals/138431/GE-Free-Standing-Electric-1112529L

1) Copy following link for live answer Dec 2012 to figure correct wire sizehttp://waterheatertimer.org/Color-codewire.html2) Fixya posts 'recommended' answers based on computer guessing what you asked. Look for date on each answer.Recommended answers can be totally unrelated, but sometimes they are spot on. These answers were posted by experts over previous years, and now fixya owns the work done by others and uses that work to answer questions that live expert does not answer.3) This particular Question was posted under 'Chrome timer knob set,' and somehow ended up among timer questions. Each expert answers questions by expertise such as timer, water heater, electric wiring etc. Often the questions do nor show a product or clearly state what answer is needed. People do not always know what they are asking for. That's why fixya is here: to help sort out possible answers.So the expert sometimes guesses at answer, or the computer guesses which recommended answers to post.4) Add a comment for live follow-up, Dec 2012 If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Open following link for instructions how to set timer by experimenting with features:http://waterheatertimer.org/How-to-set-timers.html

You need a multimeter to do some fault-finding. Also, check for a (usually hidden) square ceramic fuse mounted inside the thermal insulation of some ovens. They go open circuit with age.
The multimeter is used to perform fault-finding on the oven's controls, (inc the fuses) to determine voltage presence. Sometimes the fuse holders themselves corrode internally, causing problems.

timer my still be on or it could be stuck

When you select oven setting do the oven element and the broiler come on at the same time? If they do and the oven is not working the oven element is probably blown or there is burnt wiring at the element terminals.

i want to turn off the clock on my whirlpool stove

search for GE range and click view all GE ranges. and select your model.

http://kitchen.manualsonline.com/manuals/mfg/ge_appliances/ge_appliances_range_product_list.html



or try this maybe,

http://searchelf.com/

Owners manual is here: http://genet.geappliances.com/DocSearch/pdf/49-4629.PDF

You can probably find the part by using google -- I am about to buy a switch for a similar range.

Hello
I am sorry but here fixya.com we have no parts connections for any type of appliance, we can provide technical assistance when things go wrong, but no parts. Sorry

The circuit breaker probably tripped. Usually it will be a 2 pole 40 or 50 amp breaker. Turn it all the way OFF, then back ON. Sometimes it's not easy to visually tell if a breaker has tripped, so do it anyway. If that doen't solve the problem post back please.

You can get the manual on the link below.

http://tv.manualsonline.com/mdownloads/c84967bf-0ad9-4ed5-9e7b-e22d1dbaf7ba.pdf

Good Luck

GE 15086 manual
http://waterheatertimer.org/pdf/GE-15086-Manual.pdf

Well, to ensure the element is bad, you can take an ohm meter to the contacts of it and measure the resistance. It should be around 20 ohms. If it is much greater or infinite, the element is bad. To get to the contacts you will need to unplug the oven, pull it away from the wall and remove the rear panel. Then disconnect the element wiring and touch the probes from the meter to the contacts on the element. You can order a new element locally or from repairclinic.com. Let me know what you find.

Benjamin

Hello there:
this error code is telling you that the oven temperature sensor is going haywire and needs to e replaced
Here is the 2 error codes and what they mean and what needs to be checked
F2 Oven temp exceeds 590 w/ unlocked door High resistance or interference in oven temperature sensor. Replace oven temperature sensor F3 Open oven temperature sensor circuit Replace oven temperature sensor