Lexmark X2600 InkJet Printer - Answered Questions & Fixed issues
I have an ink refill kit and have used it with a
Hello!
Cartridges #14 and#15 can be refilled, but they won't work afterward, because they have a "smart chip" that blows the electric contacts on the cartridges (that is why Lexmark labels them as "return program cartridges").
You should buy #14A and #15A, those are refillable.
Hope that helps!
What does error C5 mean on the Lexmark X2600 all in one printer mean?
hello
For error C5 on an X2600 printer it means that you have a defective cartridge and you need to replace it. Please see link for more information: http://support.lexmark.com:80/lexmark/index?page=content&locale=en&productCode=&segment=SUPPORT&clearQuestion=Y&userlocale=EN_US&id=SO4438
Hope this helps.
Says paper jam and there is no paper jam
Leading cause of paper
jams is debris / foreign objects that accidentally fell into the paper feed
area. Please try this approach to fix the problem:
- Remove the sheets of paper from
the feeder.
- Grab a flashlight and look
inside the feeder for any debris or foreign objects.
- If you're willing and
physically able, you may also carefully turn the printer over. Any debris
should just freely roll out from the feeder.
- If feeder is clear, place the
printer on the table. Open the printer cover and remove the cartridges.
- Check the cartridge area for
any obstructions in the paper path.
- Close the printer cover.
- Re-brick your printer by
pulling out the power supply - the black box where the power cord is
plugged into. Re-plug after 30 seconds.
- When the printer turns on,
reinsert the cartridges and load some paper. Try to print again to verify
that the problem is fixed.
Will not come on.
Hello, Check the power cord and make sure it is working and seated in the back of the printer and you have power too the plug. If after you have reseated everything and tryed powering up. If not work then take to local repair shop or call cust. support for the printer.
Reset inkjet printer lexmark x2630
make sure the ink isnt dry. take a tissue and put the inkjet on it. apply slight pressure, lift up and look if there is ink on the tissue. do it a few times. if no ink on tissue it is drry replace. also clean the copper contacts on printer and inkjet
Lexmark x2600 won't recognize new print cartridge
It insists there is a Cartridge problem on the Printer............ In this Case take out the Paper from the Paper Feed Tray........ Unplug the Power Supply from the Printer.......... Remove both the Cartridges from the Printer.......... Now take a size 10 Envelope fold it so that it should become like a thin long strip........ Now Insert that Envelope on the left side corner of the Printer and move it from right to left and left to right as fast as u can for about 10 times.......... Now Insert the Ordinary Papers onto the Printer and insert both the catridges and Turn on the Printer...... Blinking Stopped...........Issue Resolved....... Still Blinking: Remove both the Cartridges take a Paper Towel turn the catridges direction so that u can see a Copper plate with small boxes on it....... Just wipe it twice or thrice with the Paper Towel.......... Now insert it and Power on the Printer and see whether the Lights are still blinking if it is still blinking...... Contact Lexmark at 1-800-539-6275!!!!! Good Luck!!!!!
Error code ec2
This error code reasons:Printhead is missingTry to Install print cartridge(s)
There is a problem
MY PRINTER HEAD IS STUCK AT THE LEFT AND WILL NOT COME BACK TO CENTER SO I CAN PUT IN A NEW CARTRIGE
Not finding what you are looking for?