20 Most Recent
LG 22" FLATRON LCD Monitor - Page 6 Questions & Answers
INCREASE PRINT SIZE
text size is set from the software you are using to view text. in internet explorer (windows 7) you go to view and use either "zoom" or "test size" to chang it, up or down. othere programs, like microsoft word, have the same ability. so bottom line here is that the text size is not controlled on the monitor but rather in the computer
WHEN PUTTING IN GAME IT
hi
press F7 to bypass that error and if did not work use another monitor to adjust the setting resolution of your pc into 800x600 and plug again the flatron monitor.
just leave a comments and i will assist you
thank you
Font to big
to use another type of font look into:
start -> settings -> control panel -> Fonts
other solution is to adjust your display to use another higher resolution:
right click on empty space on the screen and select property
a window title "display property" should pop out
select the tab "setting"
on the middle of the left side there is a bar for increasing / decreasing
the resolution
hope it helps
Power button flashes blue every couple of seconds,
This usually happens due to a bad connection between the PC and the monitor. Make sure your video cable is tightly lugged in, if this is not the problem the drivers are probably faulty, revert to your old monitor and reinstall the drivers and try again. If the problem still persists then call LG technical support.
I bought my Mother in
Set your computer to 800 by 600 by 60 Hertz video-resolution.
Connect the monitor, to see if it supports these settings.
Then, try 1024 by 768, and try 1280 by 1024, and try 1366 x 768 resolution,
to see which looks best.
Take it to an audio/video repair store, and get an estimate of how much it would cost to repair;
it may be cheaper to just give it to them, for responsible recycling, than to pay them to repair it.
Not able to use full screen
Hello,
This sounds like bad resolution is set on your computer. The LG 22" FLATRON monitor has a native resolution of 1680 x 1050. However, your video card may not support this so you can also try any other 16:10 resolution like 1440 x 900.
To change your resolution in Windows XP:
1. Access the Control Panel.
2. Choose "Display".
3. Click the "Settings" tab.
4. Under "Screen resolution" move the slider to a 16:10 resolution like 1680 x 1050 or 1440 x 900.
If you computer does not support higher resolutions, you may consider replacing your video card to take full advantage of your nice 22" Flatron monitor.
If I can further assist you, please let me know.
Regards,
KYTechnology
When I turn off the computer or restart the
Try changing the Resolution for the lowest one, if it works it will see the letters and everything very big. I have same trouble, specially since I change the original Vista Starter for the new Windows 7, I have not found a free controler that helps me and I have seen many people with same the problem. Sorry for my english.
It is connected to my Dell Inspiron. I want it to
On laptops, there is a key combination that will allow you to toggle between laptop screen, external monitor, or both. Look for a "Function" key, or FN. The location will vary, but I have seen it usually on the same row as the spacebar. Hold that down and look in the Function Keys row (F1, F2, etc.) and find the one with an icon of a screen (on my laptop, it's the F4 key). Hit the function key, and it should cycle through the three modes I mentioned above.
Good luck.
I made adjustments to my monitor to change the
sound like a loose connection, check all your cables and make sure they are securely attached to your computer and also the back of your monitor, if problem persist try going to the degauss menu and degauss the monitor, check to see if your color settings are properly configured, also check the color temperature. If none of these suggestions worked your monitor may have a more server problem, hope this helps, best of luck
Not finding what you are looking for?
