20 Most Recent
FoodSaver Smart Seal Vacuum Sealer V3825 - Page 3 Questions & Answers
What kind of thermal fuse do i need for a Haan Si-35R steamer mop ?
Unfortunately, I don't have specific information on the Haan Si-35R steamer mop, including details about its thermal fuse. However, I can provide you with some general guidance on thermal fuses.
A thermal fuse is a safety device that interrupts the flow of electricity in case of overheating. They are typically designed to be non-resettable and need to be replaced if they are triggered. Here are some steps you can take to determine the type of thermal fuse needed for your steamer mop:
1. **Check the Manual:**
Refer to the user manual or any documentation that came with your Haan Si-35R steamer mop. The manual may contain information about the thermal fuse, its specifications, and where to obtain a replacement.
2. **Inspect the Existing Thermal Fuse:**
If the thermal fuse in your steamer mop has blown, you can inspect the fuse itself for any markings or labels that indicate its specifications. Note down any information such as voltage, current, and temperature rating.
3. **Contact the Manufacturer:**
Reach out to Haan customer support or the manufacturer to inquire about the specific thermal fuse needed for your model. They may be able to provide you with the exact specifications or recommend a suitable replacement.
4. **Measure the Fuse:**
If you have the technical expertise and the necessary tools, you can measure the dimensions of the existing thermal fuse and check its electrical specifications. Be cautious and ensure the device is unplugged before attempting any measurements.
5. **Professional Assistance:**
If you're uncertain about the replacement process or lack the technical knowledge, consider seeking assistance from a professional appliance repair service. They may have access to replacement parts and can ensure the correct installation.
When replacing a thermal fuse, it's crucial to use a fuse with the same or equivalent specifications to maintain the safety and proper functioning of the appliance. Using an incorrect or incompatible thermal fuse can pose a safety risk.
Keep in mind that the availability of replacement parts may vary, and it's essential to obtain the correct part for your specific model. Always prioritize safety and, if in doubt, consult with the manufacturer or a qualified technician.
11/19/2023 9:00:47 PM •
Vacuums
•
Answered
on Nov 19, 2023
My Sonic Clean vacuum has no suction?
All questions need full make and model
https://www.google.com/search?q=sonic+clean+vacuum
They make a few models in upright and floor compacts. You have a blockage somewhere. When something is obstructing the flow, the motor is still trying to suck air. It has to go somewhere, so it blows instead. The blockage could be anywhere, but you mention brush rolls, so on an upright, remove the base plate and the brush and check the hole behind it. In a vacuum with a hose, check the hose itself and the motorized brush head, the same hole behind the brush.
https://www.google.com/search?q=sonic+clean+vacuum+no+suction
If your vacuum's suction power has decrease with use, this is because 1) the filter bag needs to be changed and/or 2) the vacuum has a clog in the suction path. For clog removal instructions, please reference page 10 of your vacuum's user manual.
..
11/4/2023 1:13:01 AM •
Vacuums
•
Answered
on Nov 04, 2023
Brush runs when handle is up on u6439-900
That's weird. When the handle is up on the Hoover WindTunnel T-Series U6439-900 Bagless Upright Vacuum Cleaner, the brushroll will not run. This vacuum is designed to run the brushroll only when the handle is in the lower (or operating) position.
I'd suggest contacting Hoover for help.
10/31/2023 3:19:53 PM •
Vacuums
•
Answered
on Oct 31, 2023
My new beldray 12 in 1 steam mop makes a clicking noise when using?
I don't find specific information about this problem. Here are some things to try. If they don't work, you may call beldray customer service. Check the water tank: Ensure that the water tank is filled with enough water and is properly inserted into the mop.
Clean the mop head: Remove the mop head and clean it thoroughly. Dirt or debris on the mop head can cause clicking noises.
Check for blockages: Check for any blockages in the nozzle or steam outlet. You can use a needle or pin to remove any blockages.
Descale the mop: If your mop has not been descaled in a while, it could be causing the clicking noise. You can descale your mop by following the instructions in the user manual.
10/22/2023 1:55:03 PM •
Vacuums
•
Answered
on Oct 22, 2023
Why doesnt my Haan steamer turn on
If your Haan steamer is not turning on, there could be various reasons for this. Here are some troubleshooting procedures to assist you in identifying and maybe resolving the issue:
Check the Power Source: Make sure the steamer is plugged into a working power source. Check if the outlet is operational by using another device or appliance.
Inspect the Power Cord: Look for any visible damage, such as frayed or exposed wires, on the power cord. If there is any damage to the cord, do not use the steamer until it has been fixed or replaced.
Safety Locks and Buttons: Some steamers feature safety locks or buttons that must be engaged before the unit will turn on. Check the user handbook for any special instructions regarding these safety measures.
Water Reservoir: Ensure that the water reservoir is appropriately filled. Many steamers require water to generate steam, therefore they may not operate if the reservoir is empty or the water level is too low.
Safety systems: Some steamers have safety systems that prohibit them from starting if specific requirements are not satisfied. For example, the steamer may need to reach a certain temperature before it can be used. Allow the steamer some time to attain the required temperature.
Overheating Protection: If the steamer includes overheating protection, it will stop down briefly if it becomes too hot. Allow the steamer to cool before using it again.
A malfunctioning power switch or electrical circuitry could be the source of the problem. If you've examined all of the external causes and the steamer still won't switch on, it may need to be inspected and repaired by an expert.
I hope you can solve your problem.
9/10/2023 12:02:51 AM •
Vacuums
•
Answered
on Sep 10, 2023
Not finding what you are looking for?
