20 Most Recent Brother MFC-9840CDW Laser Printer - Page 7 Questions & Answers

If you have had it for 3 years, yes maybe fuser, and the fuser is actually the cheapest part to replace, but I would pull all parts out first and clean everything. Then toner carts, make sure to cover and shake gently so toner is spread evenly. If you are refilling your own, they can only be refilled once.

Hello
The image below may help you to solve the problem



Good Luck and do rate the solution if got help

->First check the cartridge compatibility. ->Are you sure not to touch the electrical contacts or print head nozzles when handling the printer cartridge.->To clean the print head->Update the printer driver if it is necessary.. If you need any kind of technical assistance on printer you can contact support cell at http://www.vtechsquad.com/

Replacing the drum usually solves this problem.

You can download the Brother printer drivers from their support WEB site. Please click on this link and select your model printer to download : - http://www.brother.com.au/ProductsSolutions.aspx

gd pm po pw patolong nman po sir pano ba mag reset sa my phone q19i duo thnk

The MFC must be connected to the phone line at all times, and you must activate the automatic receive function.

Hello,

Poor line condition / out of memory is almost always caused by poor line condition.
This is to say that there is a problem trying to send because the signal is not going through clearly enough.

This error can be due to either your fax machine or the receiving ends fax machine.

Try sending to other numbers as a test to see if it works for other numbers (you can use 1-866-685-8587 for the brother test line)

If you get the same error no matter who you send to, you may want to try another jack or telephone cable.
If you are using a splitter, try without the splitter.

Thanks,

Pat