20 Most Recent Brother MFC-9840CDW Laser Printer - Page 4 Questions & Answers

If the LCD shows Not Registered when you enter a One-Touch or a Speed-Dial number, it means that an email or number is not stored there.

If you selected E-Mail and save the E-mail address, you can only use the E-mail address when you are in Scan mode. If you selected IFAX and save the E-mail address, you can only use the E-mail address when you are in Fax mode.

Your machine has 20 One-Touch keys where you can store 40 fax or telephone numbers or E-mail addresses for automatic dialing. To access numbers 21 to 40, hold down Shift as you press the One-Touch key

You can dial in any of the following ways.

Manual dialing
Use the dial pad to enter all the digits of the telephone or fax number.

One-touch dialing

Press the One-Touch key that stores the number you want to call. (See Storing one-touch dial numbers on page 60.)

To dial One-Touch numbers 21 to 40, hold down Shift as you press the One-Touch key.

Speed-dialing

Hold down Shift as you press Search/Speed Dial, and then enter the three-digit Speed-Dial number. (See Storing speed-dial numbers on page 61.) Three-digit number

menu, 4, 2, 3, start

Uninstall printer an reinstall to see if there are any missing drivers. As far as printer make sure all ink is full an paper also check to make sure cable between computer an printer has not went bad or bent prongs, an reset printer

You need to replace Laser Unit, part number LR1461001. See the link below from Brother for the instructions step by step on how to replace it: www.support.brother-usa.com/ModelDocuments/.../SU_P1226_EN.PDF Go to Ebay and search for "Brother LR1461001" to buy the part. Good luck.

Sure!!, simple: Click on MENU, LCD screen on the printer; scroll to #8 (Machine Info), click ok., 2 (Page Counter). "TOTAL XXXXXX" appears on the display. Give you Total, Copy's and faxed totals....How about that sports fans!

1. 2. -> unscrew shake to emptyhttp://s14.directupload.net/images/130409/awjs9m88.jpg

brother dcp 1510 problem is after changing toner still toner ended news coming

Go To Below official Brother Forum Page For Your problem, HL 4570CDW Others Brother Solutions Center Still having Problem Then follow Us For Brother Printer Support

After you tried all of the suggested "fixes", contact Brother to see if there's a download that might address this issue.