Top 20
Soyo Atlas DYLT3212 32 in. HD-Ready LCD Television Questions & Answers
Smear on screen
If you wish to get some details; visit the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
faults & possible causes to LCD & Plasma screen are given with illustrations
. You can get an idea about the fault to an extent. Faults to all LCD & Plasma screen are similar, irrespective of its brand and screen size
6/13/2017 10:45:03 AM •
Soyo Atlas...
•
60 views • 0 helpful votes
The picture disappeared on my 32
Try changing the input device to something you are sure, works such as a DVD player. Switch off TV manually, switch off power, remove plug and retry after 48 hours. If problem persists, please refer it to a qualified service technician.
I have a 32inch prive
i have a 32inch prive remote that dose not work how can i get one or find a code or the replacement remote
9/20/2010 10:35:57 PM •
Soyo Atlas...
•
417 views • 0 helpful votes
Power Button
Try pressing the ch+ or input button. Some inexpensive models have that luxury.
9/18/2009 1:49:26 PM •
Soyo Atlas...
•
100 views • 0 helpful votes
Prive lcd tv remote codes
no manufacture has that brand in the code list. but soyo did come out with their own remote that will work satellite/cable boxes. Go on their website. www.soyo.com
5/28/2008 3:37:29 AM •
Soyo Atlas...
•
8,057 views • 8 helpful votes
Driver for soyo atlas dylto32c
you need to change your resolution on the computer look in the desktop right click select properties , select settings, play with the resolutions until you find one that is ok, select advanced, then select displays adjust the refresh rate to some place between 60 and 75 hz, if it doesn't work wait it will return to the previous setting if it works select ok and you have the video setting as good as they will get. hope this helps
3/11/2008 4:25:23 AM •
Soyo Atlas...
•
134 views • 0 helpful votes
I have a Soyo TV you turn it on and it keeps flashing 100-0. What is wrong with it. How can it be fixed.
Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electro-medical.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "
brand name" to your device, in the "
Search box at the top right of the display window of the Homepage" to get gathered related posts.
Counting of number of blinks to Philips TVs is entirely different to that of other brand TVs. It is not a direct count procedure. The site have details about how to count the number of LED blinks [Fault Codes] to Philips brand TVs are given; along with details of the faulty circuit location.
Not finding what you are looking for?