Top 20 Insignia LCDTV26 26 in. Television Questions & Answers

Usually DIN-metric thread screws, 20mm x 1.0mm pitch They're called M6

Did you try adjusting the tracking control on machine?

Check its signal input cable connections. There shouldn't be any other problem.

Did you re-connect your insignia to an Antenna? Also if your are trying to receive over air broadcast in that part if your house it's possible you'll need a more powerful antenna.

Use a cheap Universal Remote: They come with a sheet for all applications, so just follow directions and your OK.

It sounds that the main digital board has the fault. Contact any service technician. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Check and replace damaged component/s at it main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ It will be best to replace the power supply regulator board as card basis.

If you wish to get some details, check the site linked here. Pull up older posts. Check the site in 'Mosaic' view. It will make search easy. http://electronicshelponline.blogspot.com/ Service mode entry, adjust and exit procedure to many popular brand TVs are given.

Press INFO, DISPLAY or CALL key on the remote hand set.

Check its picture settings; aspect ratio.

I would recommend calling our Product Support Team to schedule repairs at: U.S. and Canada - 1-877-467-4289Mexico - 01-800-926-3000 We're here to answer your requests daily from 7 am - 12 am CT.

I would suggest using spacers

My name is mark and you can reach me @ 707029723 and I'll let you know what pretty suse the problem

Although tie included downloadable manual is for the 32 inch TV it will probably work for your TV as well...read it carefully: http://www.insigniaproducts.com/cms/documents/IS-LCDTV32%20UM%20EN_SP_FR.pdf

Look for any loose contacts in RC jack, cable, connector. Try changing the input device to some other and see whether you can get sound. Try using a headphone, if the TV has the socket. Look for any jammed buttons on remote and/or on control panel, especially that off volume up/down/mute.

To connect with what?

Check the back-light inverter boards, and CCFL lamps inside the panel.

Looks like there is some damage to components/board inside. Might require attention by a qualified service technician.

What input are you using for the tv? Try using another input

check your cables coming from the wii to your tv and make sure they are plugged in and in the right color holes.The no signal is from the tv not the wiialso change your tv input. (maybe you are on the wrong input channel)